Table 80 - Pipe Support Data - PDS - Help

Plant Design System (PDS) Stress Analysis Interface (PD_Stress)

PPMProduct
PDS
PPMCategory_custom
Help

# Pipe Support Data

table number = 80 , number of columns = 50

1 , system_unique_no , integer , index 1
2 , pipe_support_no , character(20)
3 , model_code_phy , character(6)
4 , model_code_log , character(6)
* 5 , iso_support_type_a , short , standard note 380
6 , iso_support_type_b , short , standard note 380
7 , iso_support_type_c , short , standard note 380
8 , iso_support_type_d , short , standard note 380
9 , details_for_shop , character(50)
10 , details_for_field , character(50)
11 , fabrication_orient , character(20)
12 , commodity_code , character(16)
13 , MTO_requirements , short , standard note 365
14 , fabrication_cat , short , standard note 180
15 , weight , double , standard note 1028 (units)
16 , construction_stat , short , standard note 130
17 , hold_status , short , standard note 50
18 , standard_note_no , short , standard note 499
19 , iso_dwg_index_no , integer
20 , isometric_sheet_no , character(2)
21 , piece_mark_no , character(10)
22 , color_code , character(8)
23 , isometric_dim_a , double
24 , isometric_dim_b , double
25 , isometric_dim_c , double
26 , isometric_dim_d , double
27 , isometric_dim_e , double
* 28 , trans_rigidity_x , double
* 29 , trans_rigidity_y , double
* 30 , trans_rigidity_z , double
* 31 , rot_rigidity_x , double
* 32 , rot_rigidity_y , double
* 33 , rot_rigidity_z , double
* 34 , spring_gap_length , double
* 35 , sping_gap_direct , short
36 , number_of_springs , short
37 , last_placed_date , integer
38 , inspection_key , short
39 , mark_number , character(80)
40 , group_id , integer
41 , gang_id , integer
42 , material_grade , short , standard note 145
43 , weld_code , short
44 , material_index , character(16)
45 , operating_load , double
46 , installed_load , double
47 , hydrostatic_load , double
* 48 , total_movement_1 , double , in subunits -- distance attribute
* 49 , total_movement_2 , double , in subunits -- distance attribute
50 , rod_diameter , double , in subunits

In the preceding table, an asterisk (*) denotes piping designer input responsibility.