Table 50 - Piping/Tubing Data - PDS - Help

Plant Design System (PDS) Stress Analysis Interface (PD_Stress)

PPMProduct
PDS
PPMCategory_custom
Help

# Piping/Tubing Data

table number = 50 , number of columns = 61

1 , system_unique_no , integer , index 1
2 , piping_comp_no , character(20)
3 , commodity_name , character(6)
4 , model_code , character(6)
5 , option_code , short , standard note 400
6 , maximum_temp , double
7 , nominal_piping_dia , short
8 , outside_diameter , double
9 , schedule_thickness , character(8) , standard note 332
10 , sched_thick_basis , character(8) , standard note 332
11 , rating , character(8)
12 , commodity_code , character(16)
13 , MTO_requirements , short , standard note 365
14 , fabrication_cat , short , standard note 180
15 , source_of_data , short , standard note 425
16 , PDS_sort_code , character(6)
17 , geometric_standard , short , standard note 575
18 , weight_code , short , standard note 578
19 , table_suffix_green , short , standard note 576
20 , table_suffix_red , short , standard note 577
21 , materials_grade , short , standard note 145
22 , pipe_length , double
23 , surface_area , double , standard note 1010 (units)
24 , empty_weight , double , standard note 1028 (units)
25 , water_weight , double , standard note 1028 (units)
26 , cold_spring_length , double
27 , construction_stat , short , standard note 130
28 , hold_status , short , standard note 50
29 , heat_tracing_reqmt , short , standard note 200
30 , heat_tracing_media , short , standard note 210
31 , heat_tracing_temp , double
32 , iso_dwg_index_no , integer
33 , isometric_sheet_no , character(2)
34 , piece_mark_no , character(10)
35 , color_code , character(8)
36 , piping_assembly , character(12)
37 , component_group_no , short
38 , remarks , character(50)
39 , standard_note_no_a , short , standard note 499
40 , standard_note_no_b , short , standard note 499

41 , end_1_end_prep , short , standard note 330
42 , end_1_weld_no , character(8)
43 , end_1_weld_type , short , standard note 1100 / 400 (bolt option)
44 , end_1_gasket_gap , double
45 , end_1_gasket_opt , short , standard note 400
46 , end_1_stress_node , short
47 , end_1_stres_int , double
48 , end_1_head_loss , double

49 , end_2_end_prep , short , standard note 330
50 , end_2_weld_no , character(8)
51 , end_2_weld_type , short , standard note 1100 / 400 (bolt option)
52 , end_2_gasket_gap , double
53 , end_2_gasket_opt , short , standard note 400
54 , end_2_stress_node , short
55 , end_2_stres_int , double
56 , end_2_head_loss , double
57 , unique_name , character(12)

58 , last_placed_date , integer
59 , inspection_key , short
60 , end_1_inspect_key , short
61 , end_2_inspect_key , short