Table 12 - Piping Segment Data - PDS - Help

Plant Design System (PDS) Stress Analysis Interface (PD_Stress)

PPMProduct
PDS
PPMCategory_custom
Help

# Piping Segment Data
# Piping Segment Data

table number = 12 , number of columns = 77

1 , system_unique_no , integer , index 1
* 2 , line_number_label , character(40)
3 , line_id , character(24)
4 , unit_number , character(12)
5 , unit_code , character(3)
6 , module_no , character(16)
7 , package_system_no , character(12)
8 , train_number , character(2)
9 , fluid_code , short , standard note 125
10 , line_sequence_no , character(16)
11 , nominal_piping_dia , short
12 , piping_mater_class , character(16)
13 , gasket_separation , character(8)
* 14 , insulation_purpose , short , standard note 220
* 15 , insulation_thick , double
* 16 , insulation_density , double , standard note 1074 (units)
17 , heat_tracing_reqmt , short , standard note 200
18 , heat_tracing_media , short , standard note 210
19 , heat_tracing_temp , double
20 , construction_stat , short , standard note 130
21 , hold_status , short , standard note 50
22 , approval_status , short , standard note 35
23 , schedule_override , character(8) , standard note 332
* 24 , nor_oper_pres , double
* 25 , nor_oper_temp , double
* 26 , alt_oper_pres , double
* 27 , alt_oper_temp , double
* 28 , nor_dgn_pres , double
* 29 , nor_dgn_temp , double
* 30 , alt_dgn_pres , double
* 31 , alt_dgn_temp , double
32 , steam_outlet_temp , double
33 , mater_of_construct , character(6)
34 , safety_class , short , standard note 340
* 35 , design_standard , short , standard note 570
36 , design_area_number , character(10)
37 , design_resp , short , standard note 160
38 , construction_resp , short , standard note 160
39 , supply_resp , short , standard note 160
40 , coating_reqmts , short , standard note 190
41 , cleaning_reqmts , short , standard note 230
42 , fluid_category , character(4)
* 43 , nor_op_pres_units , short , standard note 1064
* 44 , nor_op_temp_units , short , standard note 1056
* 45 , alt_op_pres_units , short , standard note 1064
* 46 , alt_op_temp_units , short , standard note 1056
* 47 , nor_dgn_pres_units , short , standard note 1064
* 48 , nor_dgn_temp_units , short , standard note 1056
* 49 , alt_dgn_pres_units , short , standard note 1064
* 50 , alt_dgn_temp_units , short , standard note 1056
51 , steam_temp_units , short , standard note 1056
* 52 , stress_system_no , character(12)
* 53 , stress_reqmts , short , standard note 360
54 , hyd_system_no , character(12)
55 , hyd_reqmts , short , standard note 360
56 , specific_gravity_a , double
57 , specific_gravity_b , double
58 , specific_gravity_c , double
59 , viscosity , double
60 , density , double
61 , spec_heat_ratio , double
62 , sonic_velocity , double
63 , surface_roughness , double
64 , test_system_no , character(6)
65 , test_fluid , short , standard note 125
66 , test_pressure , double
67 , PID_id_part_a , character(4)
68 , PID_id_part_b , character(4)
69 , end_1_nozzle_id , integer
70 , end_2_nozzle_id , integer
71 , alpha_descript_id , character(12)
72 , standard_note_no , short , standard note 499
73 , pid_index_no , integer
74 , color_code , character(8)
75 , inspection_iso_id , character(24)
76 , index_to_pi_dwg , integer
77 , weld_id , character(80)

In the preceding table, an asterisk (*) denotes piping designer input responsibility.