Section 2: Design File Data Sorted by Coordinate - PDS - Help

Plant Design System (PDS) Stress Analysis Interface (PD_Stress)

PPMProduct
PDS
PPMCategory_custom
Help

The second section of the HITS report consists of raw design file data for each connect point of the piping components that make up the network that is being extracted. The database search criteria (as defined in the options file LINE_ID_DEFINITION) from section 1 is used to find all of the appropriate segments. When the segments are found, the software collects all of the components that are attached to the segments. Section 2 is the result of this activity.

Section 2 contains several columns of data. Each column is described below:

Name

If Intergraph option 61 is set to 1, the name will be the first four characters of the component item name. Otherwise, a generic item name will be output.

occ

The component database occurrence number (excluding the partition number).

Note that some PIPE components have an occurrence number greater than 30000. This occurs whenever olet type components are attached to a pipe. The software breaks these pipes into multiple sections. The newly created pieces of pipe receive occurrence numbers in the 30000+ range to distinguish them from the original pipe.

cp#

The connect point number

x,y,z

The coordinate in the design file coordinate system and is not adjusted for the global origin

node

A node number assigned to all connect points other than the origin. A special node number, -1, is reserved for line endpoints. Two connect points that have the same node number are connected to each other in the model.

direct

A direction list number. The direction list number identifies all those connect points that lie together on a straight line.

sect

Section number [always 0]

flags

A bit mask used internally by the software

topo

Topos [always 0 here]

branch

Branch flag [always 0 here]

sg_occ

The segment occurrence number. All connect points "belong to" or "are owned" by a segment in the piping model. sg_occ is the occurrence number of that owner segment.

Section 2 is primarily used for examining the amount of data pulled in from the models through the database search criteria. Some of the data for a specific connect point is sometimes useful — particularly the occurrence number.

Sample Section 2

Design file data sorted by coordinate
————————————-
Name Occ cp # X Y Z Node Direct Section Flags Topo Seq Branch Sg_occ
COMP 81 0 -0.15 0.00 0.00 -2 1 0 3 0 0 0 49 1
COMP 81 1 0.00 0.00 0.00 1 1 0 3 0 0 0 49 2
PIPE 49 1 0.00 0.00 0.00 1 1 0 5 0 0 0 49 3
SUPP 6 2 1.50 0.00 -0.41 -3 9 0 8 0 0 0 49 4
PIPE 49 2 1.50 0.00 0.00 2 1 0 5 0 0 0 49 5
PIPE 30002 1 1.50 0.00 0.00 2 1 0 5 0 0 0 49 6
SUPP 6 1 1.50 0.00 0.00 2 9 0 8 0 0 0 49 7
COMP 82 1 3.00 0.00 0.00 3 1 0 3 0 0 0 49 8
PIPE 30002 2 3.00 0.00 0.00 3 1 0 5 0 0 0 49 9
COMP 82 0 3.75 0.00 0.00 0 2 0 3 0 0 0 49 10
PIPE 50 1 3.75 0.75 0.00 4 2 0 5 0 0 0 49 11
COMP 82 2 3.75 0.75 0.00 4 2 0 3 0 0 0 49 12
PIPE 50 2 3.75 2.75 0.00 5 2 0 5 0 0 0 49 13
COMP 84 1 3.75 2.75 0.00 5 4 0 3 0 0 0 49 14
COMP 84 0 3.75 3.06 0.00 0 4 0 3 0 0 0 49 15
PIPE 51 1 3.97 3.28 0.00 6 5 0 5 0 0 0 49 16
COMP 84 2 3.97 3.28 0.00 6 3 0 3 0 0 0 49 17
COMP 85 1 4.68 3.99 0.00 7 6 0 3 0 0 0 49 18
PIPE 51 2 4.68 3.99 0.00 7 5 0 5 0 0 0 49 19
COMP 85 0 4.90 4.21 0.00 0 7 0 3 0 0 0 49 20
PIPE 52 1 5.21 4.21 0.00 8 7 0 5 0 0 0 49 21
COMP 85 2 5.21 4.21 0.00 8 7 0 3 0 0 0 49 22
PIPE 52 2 6.21 4.21 0.00 9 7 0 5 0 0 0 49 23
COMP 86 1 6.21 4.21 0.00 9 7 0 3 0 0 0 49 24
COMP 93 2 6.68 0.26 0.00 -1 8 0 3 0 0 0 50 25
COMP 93 0 6.68 0.41 0.00 0 8 0 3 0 0 0 50 26
COMP 92 2 6.68 0.56 0.00 10 8 0 3 0 0 0 50 27
COMP 93 1 6.68 0.56 0.00 10 8 0 3 0 0 0 50 28
COMP 92 0 6.68 1.00 0.00 0 8 0 3 0 0 0 50 29
COMP 91 1 6.68 1.45 0.00 11 8 0 3 0 0 0 50 30
COMP 92 1 6.68 1.45 0.00 11 8 0 3 0 0 0 50 31
COMP 91 0 6.68 1.60 0.00 0 8 0 3 0 0 0 50 32
PIPE 55 2 6.68 1.74 0.00 12 8 0 5 0 0 0 50 33
COMP 91 2 6.68 1.74 0.00 12 8 0 3 0 0 0 50 34
COMP 86 3 6.68 3.74 0.00 13 8 0 3 0 0 0 50 35
PIPE 55 1 6.68 3.74 0.00 13 8 0 5 0 0 0 50 36
COMP 86 0 6.68 4.21 0.00 0 8 0 3 0 0 0 51 38
COMP 86 2 7.15 4.21 0.00 14 7 0 3 0 0 0 51 39
PIPE 53 2 8.15 4.21 0.00 15 7 0 5 0 0 0 51 40
COMP 87 1 8.15 4.21 0.00 15 7 0 3 0 0 0 51 41
COMP 87 0 8.38 4.21 0.00 0 7 0 3 0 0 0 51 42
PIPE 54 1 8.61 4.21 0.00 16 7 0 5 0 0 0 52 43
COMP 87 2 8.61 4.21 0.00 16 7 0 3 0 0 0 52 44
COMP 88 1 10.61 4.21 0.00 17 10 0 3 0 0 0 52 45
PIPE 54 2 10.61 4.21 0.00 17 7 0 5 0 0 0 52 46
PIPE 30001 1 10.61 4.21 0.00 17 7 0 5 0 0 0 53 47
COMP 88 0 10.61 4.21 0.13 0 10 0 3 0 0 0 52 48
COMP 88 2 10.61 4.21 0.26 18 10 0 3 0 0 0 54 49
COMP 89 1 10.61 4.21 0.26 18 10 0 3 0 0 0 54 50
COMP 89 0 10.61 4.21 0.38 0 10 0 3 0 0 0 54 51
COMP 89 2 10.61 4.21 0.51 19 10 0 3 0 0 0 54 52
COMP 90 1 10.61 4.21 0.51 19 10 0 3 0 0 0 54 53
COMP 90 0 10.61 4.21 0.61 0 10 0 3 0 0 0 54 54
PIPE 56 1 10.61 4.21 0.71 20 10 0 5 0 0 0 54 55
COMP 90 2 10.61 4.21 0.71 20 10 0 3 0 0 0 54 56
PIPE 56 2 10.61 4.21 1.21 -1 10 0 5 0 0 0 54 57
PIPE 30001 2 12.61 4.21 0.00 -1 7 0 5 0 0 0 53 58