LSET Record - PDS - Help

Plant Design System (PDS) Stress Analysis Interface (PD_Stress)

PPMProduct
PDS
PPMCategory_custom
Help

The general format of the LSET record is as follows:

LSET, segid, s1, s2, s3, s4

where:

LSET

is the record keyword

segid

is the segment point used to associate an LSET record with each component in the piping network

s1

identifies the pressure/temperature pair used when analyzing under case 1 conditions (for example, deadweight)

s2

identifies the pressure/temperature pair used when analyzing under case 2 conditions (for example, hot)

s3

identifies the pressure/temperature pair used when analyzing under case 3 conditions (for example, cold)

s4

identifies the pressure/temperature pair used when analyzing under case 4 conditions (for example, wind)

In the options file, you can either hard code the numbers that are actually placed in LSET records for each segment or you can set them based upon the value of any attribute stored in the segment.

Sample LSET Record

LSET, B00031G,3,6,5,3