The first two welds performed by a welder will be set as production welds for a project in a discipline. By default, production welds will be sent for RTE inspection. If any weld performed by a welder is rejected, the remaining welds performed by the same welders will be set as tracer welds.
Using the AssignmentRulesMapDef sheet, you can do the following:
-
Modify or configure the conditions for production welds.
-
Modify or configure the conditions for Tracer welds.
To modify the properties and conditions:
-
Open WQMS-Admin Excel file.
-
In WQMSProdWeldsRuleMapDef section, edit the following properties to modify the conditions required for production welds.
-
UID - Type a unique identifier for the production welds in the UID syntax.
-
Name - Type a name for the production welds.
-
Description - Provide a short description
-
WQMSProdRules_IsProdReq - Type TRUE if you want to set the welds as production welds.
-
WQMSProdRules_MaxProd - Enter the count of production welds required.
-
WQMSProdRules_SaveProp - Specify the conditions for the properties separated by a pipe (|) symbol.
For example, WQMSWeld_IsProdForWelder=True~False|WQMSWeld_VIS_IsRTERequired=ELT_WQMSYorNA_Y~ ELT_WQMSYorNA_NA.
In the above example,
Set WQMSWeld_IsProdForWelder to True, if you want to assign welders and set the welds as production welds.
Set WQMSWeld_IsProdForWelder to False, if you want to unassign welders.
WQMSWeld_VIS_IsRTERequired=ELT_WQMSYorNA_Y~ ELT_WQMSYorNA_NA is set to Y by default.
-
WQMSProdRules_Discipline - Specify the discipline for the production welds. For example, Piping (PIP) or Structural (STR).
-
ContainerID - Defines the package or .xml file that contains the object.
-
Solution(s) - Type * to load the data to SPF database, or type Deleted to avoid loading the data to SPF database.
-
-
In WQMSTracerWeldAssgnRuleMapDef section, edit the following properties to modify the conditions required for tracer welds:
-
UID - Type a unique identifier for the tracer welds in the UID syntax.
-
Name - Type a name for the tracer welds.
-
Description - Provide a short description.
-
WQMSTrcrWelds_Count - Specify the count of tracer welds required.
-
WQMSTrcrWelds_SaveProps - Specify the inspection properties of the rejected weld that must be assigned to the tracer welds.
-
WQMSTrcrWelds_AssgnInNDT - Specify the inspection stage (NDT) for which the tracer welds must be assigned.
-
WQMSTrcrWelds_Discipline - Specify the discipline for the tracer welds. For example, Piping (PIP), Structural (STR)
-
WQMSTrcrWelds_Conditions - Specify the criteria based on which the tracer welds must be fetched.
-
WQMSTrcrWelds_Config - Specify the project for which the tracer weld assignment rule condition is applicable.
If you enter the value as ALL, the condition specified in WQMSTrcrWelds_Conditions property will be applicable for all projects. If you want to configure different properties and conditions for a specific project, enter the name of the project in WQMSTrcrWelds_Config and specify relevant condition in WQMSTrcrWelds_Conditions property. Also, you can configure rest of the properties (WQMSTrcrWelds_Count, WQMSTrcrWelds_SaveProps, WQMSTrcrWelds_AssgnInNDT, WQMSTrcrWelds_Discipline) for a specific project.
-
ContainerID - Defines the package or .xml file that contains the object.
-
Solution(s) - Type * to load the data to SPF database, or type Deleted to avoid loading the data to SPF database.
-