Tablet Mode > Measure
Measures from any point on a piece of geometry to the next selected object or point. Surface points can be any point on any piece of geometry in shaded mode, not including background points.
Select any two points on the model representing the distance to measure. You can select multiple points on the model and the distance is always measured between the last two points.
-
Tap Measure .
You can also press Ctrl+F8 to enable the command. -
Tap the first point on the model, and then tap the second point on the model to see the distance measurement.
-
Continue tapping each required point to see each distance measurement.
-
To exit measurement, tap Measure again.
-OR-
Right-click anywhere in the Main view. -
To remove all measurements, press CTRL+D.
-OR-
Tap Reset , which also removes clipped areas, closes additional windows, and returns the display to the default or custom home view.