The definition of the ball valve itself is complete, and now the operator must be configured.
Operator Type 10005 is needed, with SymbolDefinition Operator10005.COperator10005.
0.5 - 1.25in |
Operator Height = Valve Height + 0.525in |
OpDim1 = 1.5in |
1.5 - 3in |
Operator Height = Valve Height + 0.7in |
OpDim1 = 2in |
4 - 6in |
Operator Height = Valve Height + 1.05in |
OpDim1 = 3in |
8in - 10in |
Operator Height = Valve Height + 1.4in |
OpDim1 = 4in |
For the operator definition, these following sheets are needed and must be defined or updated:
Operator10005
PipingCommodityMatlControlData
ValveOperatorMatlControlData