PDMS/ E3D custom interfaces are used to group existing attributes written in the CustomInterfaces sheet.
To define attributes for the transfer to PDMS/ E3D, click Integration > PDMS > PDMS Configuration and then click the Attributes tab.
You can also add missing data on the fly.
-
The user defined attributes are distinguished by prefixing EX before the attribute name. For example, EX: TP-IDENT where TP-IDENT is a user defined attribute.
-
While exporting PDMS_G (geometric info) sheet, the standard attributes PARAM::N1 to PARAM::N15 are used.
Smart Reference Data delivers the following attributes:
Attribute Name |
Description |
---|---|
BDIAMETER |
Bolt diameter |
BFLE |
Out of plane flexibility factor for bends |
BITEM |
Bolt items |
BITLE |
Bolt item lengths |
BLEN |
Bolt length |
BLIS |
Bolt list |
BLRFA |
Bolt reference array |
BLTA |
Bolt table |
BLTM |
Bolt method |
BLTP |
Bolt Point |
BLTREF |
Bolt reference |
BRREF |
Branch table reference |
BSEL |
Bolt Selector |
BSPEC |
Bolt specification |
BTHK |
Parameterised bolt thickness |
BTOL |
Bore tolerance |
BTSE |
Bolt Sets |
BTYP |
Bolt type |
BTYPE |
Bolt type |
CATA |
Catalogue |
CATE |
Category |
CATREF |
Catalogue reference |
CIWE |
Total insulation weight |
CMPD |
Component Data |
CMPREF |
Component reference |
CMPT |
Component Type |
CMPW |
Component World |
CORA |
Corrosion thickness |
CWEI |
Total component weight |
DFFL |
Displacement force flexibility |
DMFL |
Displacement moment flexibility |
DTAB |
Diameter Table |
DTREF |
Data set reference |
EFAC |
E-factor |
EX::IDENT |
User Defined Attribute for Ident |
FINPUT |
Input by |
GMREF |
Geometry set reference |
GTYPE |
Generic type |
LENG |
Length |
LINETYPE |
Line Type |
LTAB |
Length Table |
MATXT |
Material text |
NOFF |
Number off |
NOMREF |
Nominal bore table reference |
NSTD |
Non-standard bolt length (reference to DTAB) |
NUMB |
Number |
OUTD |
Outside diameter |
PARAM |
Parameters |
PARAM::N1 |
Parameters |
PARAM::N10 |
Parameters |
PARAM::N11 |
Parameters |
PARAM::N12 |
Parameters |
PARAM::N13 |
Parameters |
PARAM::N14 |
Parameters |
PARAM::N15 |
Parameters |
PARAM::N2 |
Parameters |
PARAM::N3 |
Parameters |
PARAM::N4 |
Parameters |
PARAM::N5 |
Parameters |
PARAM::N6 |
Parameters |
PARAM::N7 |
Parameters |
PARAM::N8 |
Parameters |
PARAM::N9 |
Parameters |
PBOR0 |
Bore |
PBOR1 |
Bore |
PBOR2 |
Bore |
PBOR3 |
Bore |
PBOR4 |
Bore |
PDMS_ANGLE |
Angle |
PDMS_DESCRIPTION |
Description of the element |
PDAREF |
Pipe data table reference |
PDMS_DIAMETER |
Diameter |
PDMS_NAME |
Name of the element |
PDMS_RADIUS |
Radius |
PDMS_SKEY |
Symbol key |
PDMS_TYPE |
Type of the element, ignoring UDET, truncated to 4 or 6 characters |
PDMS_VERSION |
SRD Defined ( Spec Version) |
PRFC |
Pressure factor |
PTREF |
Point set reference |
RATI |
Pressure rating |
REDREF |
Reducer table reference |
RINE |
Rotational inertia vector |
RMFL |
Rotational moment flexibility |
RTEXT |
R Text string |
SBOL |
Standard Bolt |
SCOM |
Components |
SDTE |
Detail Text |
SDTH |
Saddle thickness |
SECT |
Sections |
SHAP |
Shape modulus |
SHOP |
Shop/Site flag |
SIF |
Stress intensification factor |
SMTE |
Material Text |
SPCOM |
Specifications component |
STEXT |
S Text string |
STYP |
SPECON type question |
SUFF |
Suffix |
TEMP |
Temperature |
TMPREF |
Template reference from SPCO |
TTEXT |
T Text string |
TUBD |
Tube Data |
UIWE |
Unit insulation weight |
UWEI |
Unit pipe weight |
WDIA |
Wind diameter modulus |
WTOL |
Wall thickness tolerance / Weight tolerance |
XTEXT |
X text |
XTRA |
Extra length requirement for BOLTS |
YTEXT |
Y text |
ZTEXT |
Z text |