What's New in Smart Reference Data? - Intergraph Smart Reference Data - Help - Hexagon

Intergraph Smart Reference Data Help (10.1)

Language
English
Product
Intergraph Smart Reference Data
Search by Category
Help
Smart Materials/Smart Reference Data Version
10.1

Version 10.1

  • You can now train the AI Configuration to get accurate suggestions of Commodity Codes or Codelists during the auto map procedure. You must be a privileged user to train the Configuration. For more information, see AI Configuration. (RI-MA-67500)

  • You can now launch the new Quick Navigation window using Quick Access link available on the home page to see the site view for menus, sub-menus, right mouse click options, drop-downs, tab pages, buttons, or tool-bar buttons. For more information, see Home. (CR-MA-69863)

  • You can now copy a specification from Project to Product Group or Project to Project, then the specification must have been defined under the Product Group spec type. Also, you can view the list of conflicts in the Preview tab. For more information, see Copying Non Template Specification. (RI-MA-72582)

  • You can now see a revamped Home page either on logging in or clicking the Home menu. The Home page provides various options to navigate to a screen quickly with the help of search bar, quick navigation tiles, and Quick Access link. For more information, see Home. (CR-MA-66096, CR-MA-69815, CR-MA-66100, CR-MA-68962)

  • You can now restrict users from updating the configuration details of a job such as destination, data table mappings, etc. so that the data in the destination is consistent. For more information, see Manage update of the job configuration. (CR-MA-73735)

  • You can now stop a job if errors are reported in the consistency verification stage, in order to make the necessary corrections before proceeding to the next step. For more information, see Manage job run on verification errors. (CR-MA-73720)

  • You can now assign the Smart 3D short codes from Commodity Parts grid and Spec Item grid. For more information, see Assign Smart 3D short codes . (CR-MA-73362 and CR-MA-54980)

  • You can now setup access control for each of the Geometric Types. For more information, see Add geometric details. (CR-MA-61180)

  • You can now create custom short codes to enable faster search in the search bar. For more information, see Home. (CR-MA-69816)

  • You can now perform some operations quickly by using shortcut keys. For more information, see Keyboard Shortcuts. (CR-MA-70345)

  • You can now export Insulation specs from SRD in PDMS format. For more information, see SICOM Output Format (CR-MA-64842)

  • You can now select information for all the fields using new LOV in the Specification Management-Additional Information. For more information, see Additional Information for Specification. (CR-MA-65787)

  • You can now view all the available Groups and Parts (in the LOV) for a short code in the Spec Items grid, even if no Group or Part has been assigned to the short code in the Short Code Management screen (Parts to Short Codes grid). For more information, see Specifications without a Template.(CR-MA-67765)

  • You can now apply specification header geometrics commonly across the specifications at once. For more information, see Common Spec Header Geometrics. (CR-MA-47551)

  • You can now build specification idents for the specification header geometrics using the new Build Spec Idents button. After you build the idents, a log file is generated. You can view the log file using the new Show Log File button. For more information, see Cover Page. (CR-MA-68183 and CR-MA-68185)

Version 10.0

  • You can now directly navigate to Smart Materials Web from SRD through the Administration and Reports menu. For more information, see Navigate to Smart Materials Web (CR-MA-65452)

  • You can now add additional information about a specification. For more information, see Additional Information for Specification. (CR-MA-26730, CR-MA-52919)

  • You can now add comments to a record in Property view, Explorer view, Non-basic grids, and Forms. For more information, see Comments. (CR-MA-64940, CR-MA-64941, CR-MA-64942, CR-MA-65318, CR-MA-64857 and CR-MA-65242)

  • You can now configure Smart Reference Data Plus to export data to Plant Design Management System (PDMS). For more information, see Plant Design Management System (PDMS) Configurations. (RI-MA-52447)

  • You can now manage general configurations for PDMS interface and the corresponding general configuration item values in Smart Reference Data Plus. For more information, see General Configurations. (RI-MA-52490)

  • You can now verify the data in Smart Reference Data Plus before exporting to PDMS. For more information, see Verification Sets and Reports. (RI-MA-52589)

  • You can now verify missing data in the mandatory columns in the data table before you export to PDMS using RequiredColumnValuesMissing verification routine. For more information, see Verification Sets and Reports. (CR-MA-63117)

  • You can now create, define and start a new job in PDMS interface using the transfer jobs functionality. For more information, see Create a new job, Define a job, Start a job. (RI-MA-52593)

  • You can now keep track of the data transferred to PDMS catalogs using the Destinations command. For more information, see Destinations. (RI-MA-52592)

  • You can now create catalog structure on the fly in PDMS interface. For more information, see Catalog structures. (RI-MA-52592)

  • You can now build idents in considerably reduced time in both SRD Plus and SRD Classic. A recent design change has considerably improved the performance. (CR-MA-62278, CR-MA-65136)

  • You can now access the online help which is available on the fluid topics. For more information, click F1 or Help in the SRD Refrence Data Plus application to open the fluid topic page. (RI-MA-64094)

  • You can now navigate to Inteface/Company Commodity Codes screen from Commodity Codes grid and tree view. For more information, see Add a commodity code (CR-MA-62501)

  • You can now navigate to Company/Interface Idents from commodity codes tree/ grid view. For more information, see Add a commodity code (CR-MA-62894)

  • You can now navigate to PipingCommodityMaltControlData sheet in Staging Area. For more information, see Map and Import Commodity Codes (CR-MA-64114)

  • You can now navigate to Table/Attributes from Commodity Rules /Attribute Sets. (CR-MA-64125)

  • You can now navigate to Notes in Notes Management from Notes in Codelist Mappings.(CR-MA-66118)

  • You can now navigate to Notes in StandardNotesData sheet from Standard Notes in Smart 3D.(CR-MA-66245)

  • You can now view Note Types and Notes grid in a new screen General Notes. (CR-MA-65050)

  • You can now import Interface/Company Notes from Standard Notes sheet into the selected Interface/company. For more information, see Map and Import Codelists (CR-MA-65068)

  • You can now add color to columns in Commodity Attributes, Attributes Set Details (CR-MA-61652)

Version 8.4

  • You can now copy a nominal size and all of its details by right-clicking the nominal size in the tree view and clicking Duplicate. For more information, see Add a nominal size table. (CR-MA-48321)

  • You can now use Release Spec screen to release or revert release of specifications from product group to the project you are logged in to. For more information, see Release Product Group Specifications to Project. (RI-MA-53494)

  • You can now view ident attribute values by defining ident attribute functions. For more information, see Managing Ident Attribute Functions. (CR-MA-53163, CR-MA-53159)

  • You can now configure Smart Reference Data Plus to export data to CADWorx. For more information, see CADWorx Configuration. (CR-MA-52505, CR-MA-52508, CR-MA-54384, CR-MA-52515)

  • You can now generate data table mappings for imported commodity codes by clicking Generate > Data Table Mappings from commodity code mappings screen. For more information, see Map and Import Commodity Codes. (RI-MA-47843)

  • You can now translate tables specific to an interface, using interface table translations functionality. For more information, see Add Translations to Interface Tables. (CR-MA-53485)

  • You can now translate attributes specific to an interface, using interface attribute translations functionality. For more information, see Add Translations to Interface Attributes. (CR-MA-53601)

  • You can now import company idents from a Microsoft Excel worksheet to Smart Reference Data Plus and manage them in the application. For more information,see Import company idents (RI-MA-54007)

  • You can now manage general configurations for CADWorx interface and the corresponding general configuration item values in Smart Reference Data Plus. For more information, see General Configurations. (CR-MA-54518, CR-MA54519, CR-MA-54523)

  • You can now verify the data in Smart Reference Data before exporting to CADWorx. For more information, see Verification Sets and Reports. (RI-MA-56637)

  • You can now verify missing data in the mandatory columns in the data table before you export to CADWorx using RequiredColumnValuesMissing verification routine. For more information, see Verification Sets and Reports. (CR-MA-56706)

  • You can now create, define and start a new job in CADWorx interface using the transfer jobs functionality. For more information, see Create a new job, Define a job, Start a job. (CR-MA-56406)

  • You can now keep track of the data transferred to CADWorx catalogs using the Destinations command. For more information, see Destinations. (CR-MA-58673)

  • You can now create catalog structure on the fly in CADWorx interface. For more information, see Catalog structures. (CR-MA-52816)

  • You can now export CMS idents using Smart 3D transfer jobs, by adding them from CMS Idents or CMS explorer screens. For more information, see Add CMS Idents to Smart 3D export job. (CR-MA-55587)

  • You can now view the ident structure of assembly idents from the Components page of Spec Editor screen. For more information, see View ident structure. (CR-MA-58335, CR-MA-58336, CR-MA-58812)

  • You can now duplicate an existing template with the corresponding data tables and data. In addition, you can copy (or cut) specific data table(s) with data from single or multiple template(s) to another template. For more information, see Templates.(CR-MA-54395)

  • You can now assign colors to attributes and definition attributes in a data table when exporting them to CADWorx by a transfer job. For more information, see Assign colors to attributes and definition attributes in a data table (CR-MA-54385)

  • You can now import data from Smart 3D to Smart Reference Data Plus by choosing between Catalog driven and Specification driven import. For more information, see Setup Configuration. (CR-MA-59378)

  • You can now create table group links and table detail links from Table Management screen. For more information, see Create table group links and Create table detail links. (CR-MA-58627,CR-MA- 58628, CR-MA-58914,CR-MA-58915)

  • You can now highlight table, table group, or table detail in the explorer view from the respective grids. For more information, see Table Management (CR-MA-59274, CR-MA-59275, CR-MA-59276, CR-MA-59277, CR-MA-59485, CR-MA-58629)

  • You can now view the list of commodity codes impacted by table detail links. For more information, see View commodity codes impacted by table detail links. (CR-MA-59593)

  • You can now validate the linking of table details using project default ZS_ALL_TDL. For more information, see ZS_ALL_TDL. (CR-MA-59146)

  • You can now import attribute mapping for part class data tables and specification data tables. For part class data tables, attribute mapping needs to be done based on the imported commodity codes. For specification data tables, attribute mapping needs to be done based on the commodity codes for piping commodity filter. For more information, see Creation of Attribute Mapping . (CR-MA-54962), (CR-MA-54963)

  • You can now automate export configurations in Smart Reference Data Plus to export the imported Smart 3D data into Smart Reference Data Plus. For more information, see Automate export configurations. (CR-MA-54968) (CR-MA-59313) (CR-MA-59314) (CR-MA-59318) (CR-MA-59400) (CR-MA-59458)

Version 8.3

  • A new general configuration item, SP3D_LOGON_PASSWORD has been added to encrypt the password for a user who do not have SRD_VIEW_PASSWORD privilege. For more information, see Manage general configurations. (CR-MA-39593)

  • You can now use Commodity Code Usage to view all the occurrences of a commodity code that is used across various work areas. You can also save the commodity code usage and search for any text in the commodity code usage. For more information, see View commodity code usage. (CR-MA-33932, CR-MA45116)

  • You can now set a commodity code as Disused in the commodity codes grid, to disuse or retire a commodity code. You can also change the Disused status of a table detail in the Table Details/Link Table Details grid. If any of the table detail is set to Disused, the associated commodity code will also be marked as Disused. For more information, see Add a commodity code. (CR-MA-37298) (CR-MA-46526)

  • You can now verify disused commodity codes before you export to Smart 3D using DisusedCommodityCodes verification routine. For more information, see Verification Sets and Reports . (CR-MA-45485)

  • You can now verify missing valve operators before you export to Smart 3D using MissingValveOperators verification routine. For more information, see Verification Sets and Reports . (CR-MA-41431)

  • You can now view the Interface/Company commodity groups corresponding to the Smart Reference Data table group using Show Interface/Company Data from option. For more information, see Add a commodity group. (CR-MA-47367)

  • You can now schedule jobs using the transfer jobs functionality. For more information, see Manage Schedule Job (CR-MA-45545)

  • You can now map and import general rule and general list from Smart 3D to Smart Reference Data Plus. For more information, see Map and Import Other Rules (CR-MA-49465)

  • You can now view related Help topic for most screens by pressing F1 (CR-MA-46932)

  • You can now compare source and target specification for projects or product groups. For more information, see Compare Specification Header Geometrics (CR-MA-48373)

  • You can now map Smart 3D commodity codes to Smart Reference Data commodity codes using suggestions based on either commodity rule or description. For more information, see Map and Import Commodity Codes (RI-MA-50956)

  • You can now map Smart 3D codelists to Smart Reference Data table details using suggestions based on description. For more information, see Map and Import Codelists (RI-MA-47705)

  • You can now map and import spec item geometric from Smart 3D to Smart Reference Data Plus. For more information, see Map and Import Specifications (CR-MA46102, CR-MA-46107)

  • You can now assign a geometric to a commodity code as an ident or a non-ident. In addition, you can also view if a geometric is considered as ident or non-ident geometric on the Ident Management screen. For more information, see Build idents (CR-MA-43290)

  • You can now control the transfer of idents from project to product group by using project default ZS_IDT_PG. For more information, see ZS_IDT_PG (CR-MA-36959)

  • You can now export user defined symbol keys by providing PROJECTDATA.XML file. For more information, see Create a custom symbol key (CR-MA-25410)

  • You can now generate missing ident report for multiple schedule combination.For more information, see View missing idents (CR-MA-40978)

  • You can now view disused commodity codes and differentiate them from other commodity codes, before creating the company commodity codes for disused commodity code.Create company commodity codes (CR-MA-45929)

  • You can now update the Ident descriptions for the existing Idents based on object parameter layout. (CR-MA-46025)

  • You can now generate ICC/CCC based on Interface Group Code and Company Group Code. For more information, see Create interface commodity codes and Create company commodity codes (CR-MA47409)

  • You can now automap commodity codes and codelists using Assisted Mappings screen. For more information, see Map and Import Codelists and Map and Import Commodity Codes (CR-MA-47706, CR-MA-47709, CR-MA-47713, CR-MA-49816, CR-MA-49249)

  • You can now schedule SRD-S3D job using SRD WEB APIs from Smart Reference Data Plus client without any additional license. However, if a job is scheduled using SRD WEB APIs from any external client, SRD License is consumed for each request. (CR-MA-48236)

Version 8.2

  • You can now use Microsoft windows operating system username to configure automatic login into the Smart Reference Data. For more information, see Single Sign-on. (CR-MA-4032)

  • You can now use SRD Reports feature to run Smart Reference Data Oracle reports from Smart Reference Data Plus. For more information, see Smart Reference Data Reports. (CR-MA-40237)

  • You can now define an angle range (high and low) for a branch. For more information, see Add a branch. (CR-MA-42168)

  • You can now manage the display of numeric data in Attribute Values grid and Geometrics grid, based on the Decimal symbol and Display leading zero settings provided in the control panel of your computer (space cannot be used as decimal symbol).This has also been implemented in HF 8.1.0.1. (CR-MA-25451)

    1. Click Start, click Control Panel, click Clock, Language, and Region, and then under Regional and Language Options, click Change the date, time, or number format.

    2. On the Formats tab, click Additional settings and then type the required Decimal symbol.

  • You can now select option codes based on Usage (interface). For more information, see Allowed option codes. (CR-MA-43496)

  • You can now import valve operators from Smart 3D catalog to Smart Reference Data Plus. For more information, see Map and Import Commodity Codes. (RI-MA-30566)

  • You can now map and import specifications from Smart 3D data to Smart Reference Data Plus. Also, you can create new specifications from the imported spec data. You can map and create the following spec data:

    • Specification Details (PipingMaterialsClassData)

    • Specification Header Geometrics ( ServiceLimits, PipeNominalDiameters, Schedules, PipeBranch, and Nominal Reducers in PCF)

    • Specification Notes (Standard Notes Data)

    • Spec Items (PipingCommodityFilter)

    • Specification Templates (AllowablePipingMaterialsClass, Permissible Taps, CorrosionAllowance, MinimumPipeLengthRulePerSpec, MinPipeLengthPurchasePerSpec, ThicknessDataRule, BendAngles, WeldClearance, OutsideSurfaceTreatment, InsideSurfaceTreatment, PortAlignmentPerSpec, PipeTakedownParts, Bolt Selection Filter, Nut Selection Filter, Washer Selection Filter, and Gasket Selection Filter). For more information, see Map and Import Specifications (RI-MA-38261)

Version 8.1

  • You can now import the following Smart 3D data to a staging area in Smart Reference Data Plus and then map the existing project/product group data in Smart Reference Data Plus:

  • You can now view the Interface/Company table details corresponding to the Smart Reference Data table details using Show Interface/Company Data from option. For more information, see Manage interfaces/ companies. (CR-MA-36021, CR-MA-36022, CR-MA-36023, CR-MA-36024)

  • The Geometric Management functionality is now improved with enhancements in duplicating, renaming, and deleting geometric details. For more information, see Duplicate a geometric and its details. (CR-MA-36188, CR-MA-36189, CR-MA-36190)

  • The hierarchy for classifying specifications are now reorganized to Specification Type/ Spec Code/ Short Code/ Spec Items. For more information, see Spec Editor. (CR-MA-36166, CR-MA-36167)

  • The Spec Item grid has been enhanced to allow direct navigation to short codes, commodity codes, group, part, and geometric grids. For more information, see Specifications without a Template. (CR-MA-36657)

  • The Copy Spec function has been redesigned for easy search of specs in the current product group and projects, and then copy the specification to the destination. For more information, see Preview: View the conflicts. (CR-MA-36681)

  • You can now access Business Intelligence Reporting Portal to execute Smart Materials reports from Smart Reference Data Plus. For more information, see Run BIR Reporting from Smart Reference Data. (CR-MA-38744)

Version 8.0

  • You can now create catalog structure on the fly. For more information, see Catalog Structures. (CR-MA-28532 )

  • You can now select either SRD or interface specific table details when generating interface commodity codes. For more information, see Create interface commodity codes. (CR-MA-30216, CR-MA-30286, CR-MA-30454)

  • You can now add, update, and delete interface or company specific table details to a corresponding SRD table details. For more information, see Manage interfaces/ companies . (CR-MA-30290)

  • You can now view missing idents with NPDs (nominal size), along with the reasons for the selected specification. For more information, see View missing idents. (CR-MA- 26904)

  • You can now assign any geometric to a commodity code. For more information, see Build idents. (CR-MA-28467)

  • You can now set the symbol image (PDB document view file) as a default image for a symbol code and associate to a commodity part, commodity code, and Ident. For more information, see Add symbol information to a commodity code. (CR-MA-29484, CR-MA-29595)

Version 2011 R1 SP3 (7.1.3)

  • You can now create nominal reducer tables and details in the software. For more information, see Nominal Reducers. (CR-MA-27434, CR-MA-27435)

  • It is now possible to create commodity geometric relationships for all commodity codes that apply to a geometric rule definition. For more information, see Geometric Rules. (CR-MA-27446)

  • You can now build idents manually in Smart Reference Data Plus. For more information, see Build manual idents. (TR-MA-20668)

  • You can now create, edit, and delete table types with the Table Management command in Smart Reference Data Plus. For more information, see Manage a table type. (CR-MA-25279)

  • You can now add, update, and delete attribute values for NLS independent and NLS dependent attributes. For more information, see Manage attribute values. (CR-MA-25275, CR-MA-25276)

  • You can now add, update, and delete attributes in a table. For more information, see Manage table attributes. (CR-MA-25284)

  • You can now add, update, and delete short codes with the Short Code Management command in Smart Reference Data Plus. For more information, see Manage short codes. (CR-MA-87084)

  • You can now create table links across various groups by linking the table details of the respective tables of the respective tables. For more information, see Create table links. (CR-MA-25281)

  • You can now group short codes of a particular type. For more information, see Group short codes. (CR-MA-26676)

  • You can now assign parts to a short code. For more information, see Assign parts to short codes. (CR-MA-24902)

  • You can now add, edit, delete, duplicate, and rename transfer types. For more information, see Transfer Types in Smart Reference Data Plus Help. (CR-MA-24776)

  • You can now add, edit, and delete a procedure to data tables in a data table configuration. For more information, see Procedures in Smart Reference Data Plus Help. (CR-MA-24778)

  • You can now add Smart 3D short codes to Smart Reference Data, and you can also edit, and delete the short codes. For more information, see Assign Smart 3D short codes . (CR-MA-26675)

  • You can now assign Smart 3D data tables to short codes. For more information, see Assign Smart 3D data tables to short codes. (CR-MA-26677)

  • You can now maintain consistent data among various tools. When tools are mapped with each other, the tool version management allows you to automatically synchronize the changes made in one tool with other tool. For more information, see Manage Tool Versions. (CR-MA- 27984)

  • You can now assign allowed option codes to short codes. For more information, see Allowed option codes. (CR-MA-26674).

  • You can now view the symbol version of an attached symbol file in the Symbol Version column in the Documents grid. You can also assign a symbol to a specific tool version from the Documents grid. For more information, see Upload a file. (CR-MA-27986)

  • You can now view, add, update, and delete symbol codes for a symbol in the Symbols Codes grid in the PDB Document Manager grid. For more information, see Manage Symbol Codes.(CR-MA-28223)

  • You can now associate group and part codes with an object parameter. These part codes with object parameters can be used while creating idents. For more information, see Associate group and part code with an object parameter. (CR-MA-26893)

  • You can now verify the data in Smart Reference Data Plus before exporting to Smart 3D. For more information see Verification Sets and Reports . (CR-MA-27894)

  • You can now link interfaces and commodity codes together by creating interface commodity codes. For more information, see Create interface commodity codes. (CR-MA-28252, CR-MA-28253, CR-MA-28254)

  • You can now link companies and commodity codes together by creating company commodity codes. For more information, see Create company commodity codes. (CR-MA-24901, CR-MA-24834, CR-MA-28885)

  • You can provide layout short and layout long descriptions in the Commodity Codes (Others) grid when adding a commodity part. For more information, see Add a commodity part. (CR-MA-28466)

  • You can now filter the valve operator part class data tables using the General Configurations. For more information, see Manage general configuration values. (CR-MA-15790)

  • You can now view symbols for the components mapped to a data table. For more information, see View symbols for the components mapped to a data table. (CR-MA-24816)

  • You can now generate GasketSelectionFilter, BoltSelectionFilter, NutSelectionFilter, and WasherSelectionFilter specification rule data tables using the Fill Spec Rule option. For more information, see Generate Smart 3D specification rule data tables using templates. (CR-MA-18785)

  • You can now assign colors to attributes and definition attributes in a data table when exporting them to Smart 3D by a transfer job. For more information, see Assign colors to attributes and definition attributes in a data table. (CR-MA-13015)

  • The new sub menu XA7030 Symbol Library Management has been added to manage symbol libraries. For more information, see Manage Symbol Library. (CR-MA-28888)

  • The columns Symbol Library Name, Symbol Library Version, and Compatible Version Range have been added in the Documents grid. For more information see, Managing Documents and Files. (CR-MA-28890)

  • You can now keep track of the data transferred to Smart 3D catalogs using the Destinations command. For more information, see Destinations in Smart Reference Data Plus Help. (RI-MA-28256)

  • You can now add symbol information such as symbol library name, symbol library version, symbol code and part data basis to an ident. For more information, see Add symbol information to an ident. (CRM-MA-28862)

  • You can now add symbol information such as symbol library name, symbol library version, symbol code and part data basis to a commodity code. For more information, see Add symbol information to a commodity code. (CR-MA-28861)

  • If symbol information is not associated to the ident, and are also not available with its associated commodity code, then that ident automatically inherits the existing symbol details, if any, from its associated commodity part. The inherited symbol information is displayed in Green in commodity code and idents grid. For more information, see Add symbol information to a commodity code. (CR-MA-28228)

  • You can now add symbol information such as symbol library name, symbol library version, symbol code and part data basis to commodity part. For more information, see . (CR-MA-28860)

  • If symbol information is not associated to the ident, and are also not available with its associated commodity code, then that ident automatically inherits the existing symbol details, if any, Add symbol information to a commodity partom its associated commodity part. The inherited symbol information is displayed in Brown in idents grid. For more information, see Add symbol information to an ident. (CR-MA-28229)

  • The new view Smart3DSymbols has been added to Documents grid to view symbol management related columns. For more information, see Managing Documents and Files. (CR-MA-28232)

  • You can now view symbol codes associated to a symbol library in the Symbol Library window. For more information, see Manage Symbol Codes. (CR-MA-28918)

  • You can use the attribute set layout to create attribute based commodity codes. For more information, see Manage attribute set layout. (CR-MA-27955)

  • You can now export symbols to Smart 3D using transfer jobs. For more information, see Export symbols in the Smart Reference Data Plus Help. (CR-MA-28219)

  • You can now add, edit, and delete the retrieval sources for data tables, attributes, and data table configurations. For more information, see Retrieval Sources in the Smart Reference Data Plus Help. (CR-MA-24775)

  • You can now add, edit, and delete attribute sets and attribute set details in Smart Reference Data Plus. For more information, see Manage an attribute set and Manage attribute set details. (CR-MA-27953 and CR-MA-27954)

(Version 2011 R1 SP2 (7.1.2)

  • New screens for object parameters and object parameter details have been added to the software. For more information, see Object Parameters. (CR-MA-24836, CR-MA-24837, CR-MA-24903)

  • When creating commodity codes, you can now assign object parameters at the same time. The Commodity Codes grids include an Object Code column for this purpose. (CR-MA-26471)

  • You can now easily navigate from a table of type Branches, Nominal Sizes, Schedules, Nominal Reducers, or User Defined in the Specification Header Geometrics grid to the associated table definition screen. For more information, see Cover Page. (CR-MA-26699)

  • The Ident Key for Rule grid has been enhanced with a drag and drop feature. For more information, see Define an ident rule. (CR-MA-25161)

  • It is now possible to define specification rules and specification types in Smart Reference Data Plus. For more information, see Specification Rules and Specification Types. (CR-MA-25220, CR-MA-25221)

  • The pressure/temperature feature has been enhanced. It is now possible to open the geometric management screen directly from the Temperature Pressure page, and it is also possible to add diameters by nominal sizes. For more information, see Temperature Pressure. (CR-MA-24790)

  • You can define the interface commodity keys, company commodity keys, and concept commodity keys for a commodity rule. For more information, see Define the structure of commodity codes. (CR-MA-25157, CR-MA-25158, CR-MA-25156)

  • The layout for commodity keys and concept commodity keys is now configurable. For more information, see Define commodity layout. (CR-MA-25159, CR-MA-25160)

  • You can now define commodity rules, including all associated data. For more information, see Commodity Rules. (CR-MA-24833)

  • A Delete button has been added to the tree view (also known as the Explorer view). You can use this button to delete nodes directly from the tree view. (CR-MA-26142)

  • You can now build idents for all the spec items in a non-template spec, not just the idents for a single spec item. For more information, see Build all idents for a non-template specification. (CR-MA-24784)

  • You can now create schedule tables and their associated details. For more information, see Schedules. (CR-MA-24828, CR-MA-24829, CR-MA-24830)

  • Commands for duplicating, renaming, and deleting branches are now available from the shortcut menu in the tree view for branches. For more information, see Branches. (CR-MA-24791)

  • The following enhancements for tables have been implemented. For more information, see Table Management. (CR-MA-25279, CR-MA-25284)

    • The shortcut menu in the tree view for table types now provides a command to open the Properties dialog box.

    • You can now double-click a table in the tree view to add, update, or delete attributes in a grid.

  • Attribute groups and attributes can now be managed using the new XS10 Component Manager > XS1060 Attribute Management screen. For more information, see Attribute Management. (CR-MA-25269)

Version 2011 R1 SP1 (7.1.1)

  • Part data basis symbols can now be linked to commodity parts and commodity codes. The corresponding columns have been added to the commodity parts and commodity codes grids. For more information, see View part data basis for a commodity part or commodity code or ident. (B-104306, B-104308, B-113235)

  • You can now define the proxy settings used in the URL validation stage when components are imported from the ThomasNet web site. For more information, see the Smart Reference Data Plus Component Management System guide. (B-105583)

  • You can now create assemblies and multi assembly positions. You can also enter table details information for an assembly and for a single assembly position. For more information, see Assemblies. (B-90960, B-90962)

  • You can now create and modify documents in Smart Reference Data Plus. In addition, you can link part data basis (PDB) symbols to a document. For more information, see Managing Documents and Files. (B-104292, B-104299, B-104300, B-104302)

Version 2011 R1 (7.1.0)

  • Label text for menus is now translatable. Menu labels from A.30.01 are considered, according to the NLS mapped to the login culture. A new DBA setting, EXCLUDE_MENU_NUMBER, specifies whether to omit the menu numbers for menu items. For more information, see the Smart Materials DBA Settings Guide. (B-101230)

  • The category names, property names, and descriptions on Properties dialog boxes can now be translated. For more information, see Enter translated text for prompts. (B-94845)

  • The SRD > XS10 Component Manager menu has been re-organized to make it more intuitive to use. The menu now contains the following commands:

    • XS1010 Commodity/Ident Management

    • XS1020 Geometric Management

    • XS1030 Geometric Rules

    • XS1040 Table Management

    • XS1050 Assembly Management

      (B-93645)

  • You can now access the Technical User Forum directly from the Help menu in Smart Reference Data Plus. A DBA setting, TUF_URL, specifies the link. For more information, see the Smart Materials DBA Settings Guide. (B-95314)

  • The new Geometric Rules screen has been implemented, so you can now add, edit, and delete geometric rules in Smart Reference Data Plus. For more information, see Geometric Rules. (B-90948)

  • The Assembly Management screen allows you to insert, update, and delete assemblies and to view the assembly positions in a grid. You can access this screen by clicking SRD > XS10 Component Manager > XS1050 Assembly Management. (B-90956)

  • When duplicating or copy/pasting a commodity code in the Attribute Based Commodity Codes or Table Based Commodity Codes grid, the new code now contains the DUPL: prefix. In addition, when you add a new row, the Commodity Code field contains a default value. The Standard field is now mandatory. For more information, see Duplicate a row, Example Copy and Paste Rows Workflow, and Add a commodity code. (B-88765)