You can use Parameter Mapping to change values of attributes listed below.
Target Variable |
Description |
Shape.LocationX |
Ability to adjust the OFFSET_X value for example with mathematical operations. |
Shape.MarginX |
Margin offset value in mm added for end cut. This additional offset value is added in nesting phase between parts. End cut location will be relocated by this value. Original end cut is changed to inner macro cut. This value can be used for example for clamp margins. |
Shape.MarginXCut |
Margin offset value in mm added for end cut. This additional offset value is added in nesting phase between parts. End cut location is not relocated by this value. |