Profile Type
Choose from the combo box or type a new one. Empty value means any.
Source System
Design system, for example S3D. Empty value means any.
Source Macro
The macro name in the Source System. The asterisk wildcard (*) is specified to match zero or more characters. For example BP* matches to BP0001 and BP0003.
Target Profile Type
The profile type in the end code for the profile robot. Choose from the combo box or insert a new one.
Target Machine
The name of the profile robot machine.
Target Macro
The macro name in the end code for the profile robot. Use xml reference [Shape.Code] if target macro will be same as Source Macro.
Mapping Usage
Map with or without Criteria: If "loose criteria" is needed for the profile macro mapping, choose this option.
For example: Profile macro FB001 has several combinations of accepted parameters ANGLE_D and ANGLE_B or ANGLE B or ANGLE D. Whenever bevels are not defined in S3D, all bevel-related parameters will be missing from the S3D output. In this case, one mapping for macro FB001 with the option Use without Criteria can be given. Please refer to the Default Value field definition in Parameter Mapping that is used to override the missing parameters.
Map with Criteria: The set criteria must match in order the macro is used.
Ignore Macro: If criteria match, macro is not forwarded to the robot code but ignored.
Parameter mapping usage
Parameter Mapping Only: All the parameters are defined in the parameter mapping. Other possible values coming from the source system are not used.
One to one mapping: All the parameters defined in the source system are used as such.
One to one + Parameter Mapping: All the parameters defined in the source system and not defined in the parameter mapping are used as such. All the parameters defined in the parameter mapping are handled as defined in the parameter mapping.
Reference Point
The length point used in Source System (OFFSET_X, OFFSET_X1). Combo box does not exists if only one Reference Point is used. Then Reference Point must be set to NSYProfileMacroReferencePoint parameter.
Set Name: Name for the set. Can be used for searching and grouping several macro mappings.
Active: Choose if the macro mapping is active and will be used for the mapping.