Open the Service Pids Utility - Intergraph Smart P&ID - 11.0 - Help - Intergraph

Intergraph Smart P&ID Utilities Help

Language
English (United States)
Product
Intergraph Smart P&ID
Subproduct
Smart P&ID Utilities
Search by Category
Help
Smart P&ID Version
11
Smart Engineering Manager Version
12
  1. In Windows Explorer, browse to the ..\SmartPlant\P&ID Workstation\bin folder and double-click servicepidsexe.exe.

    The Service Pids utility can also be run from within a drawing, but open drawings (or drawings in a recreate state) cannot be repaired. To run the Service Pids utility from within an open drawing in Smart P&ID, click Tools > Custom Commands and then, on the Custom Command dialog box, browse to ..\SmartPlant\P&ID Workstation\bin and double-click servicepidsexe.exe.

  2. On the Service Pids dialog box, click Show Drawings to display a list of all the drawings associated with the active plant.

    PPM All Outputs Graphic

  3. Select the check boxes beside the drawings that you want to process.

    SHARED Tip Click Select All to select all the drawings of the active plant.

    PPM All Outputs Graphic

  4. Do one of the following:

    • Click Repair & Report to start the reporting process and address problems found.

    • Click Report to start the reporting process.

    • The Report command only reports problems. Problems are addressed by running the Repair & Report command or opening the drawing and running the Repair Relationship Indicators utility (RepairRelIndCmd.dll).

    • The Status column of the Service Pids dialog box shows the current status of each drawing as follows:

      • The status indicates that the drawing is being processed.

      • The PPM All Outputs Graphic status indicates that the drawing was processed successfully.

      • The PPM All Outputs Graphic status indicates that the drawing is either open or in a recreate state.

        PPM All Outputs Graphic

  5. Click View Logfile to view the results of the reporting or repair process.  The log file can be saved as a text file and printed.

  6. Click Close to close the utility.