Change Gapping Style - Intergraph Smart P&ID - Help - Intergraph

Intergraph Smart P&ID Options Manager Help

Intergraph Smart P&ID
Options Manager
Search by Category
Smart P&ID Version
9 (2019)
Smart Engineering Manager Version
10 (2019)
  1. Select Gapping PPM All Outputs Graphic.

  2. Select the Line Style row for the gapping style you want to modify.

  3. Select the corresponding Gapping Style box, and select from the list the symbol you want to use to indicate gaps in the selected line type.

  4. Select Save PPM All Outputs Graphic.

  • Options set for gapping in Smart P&ID Options Manager apply only to automatically gapped lines.

  • You can change the gapping style for line types at any time. However, after you define a new line type, you cannot change its name, but you can delete that row from the table and redefine another line type.

  • If you change the gapping style after creating drawings, and you want that change to be reflected in the drawings, you must run the Update Drawings command. See Update Drawings Command in the Drawing Manager Help.