When converting formats that apply to existing item properties, the conversion applies to Smart P&ID data, according to the software programs that are installed, in the entire plant.
This example demonstrates how conversion of the following formats affects item properties in a P&ID drawing.
Format Category |
Current Format |
Convert to Format |
---|---|---|
Pressure |
Pressure-psi |
Pressure-BarG |
Temperature |
Deg-F |
Deg-C |
Thickness |
Thickness-in |
Thickness-cm |
Thickness |
Thickness-in(symbol) |
Thickness-cm |
-
Place a pipe run in a drawing and assign the following property values and formats:
In this example, there are two properties (Insulation Thk and Schedule Or Thk) whose current formats belong to the same format category (Thickness) but which have different formats: Thickness-in and Thickness-in(symbol) respectively. The software only allows you to convert one format at a time per format category, therefore the procedure for implementing this conversion is as follows:
-
Close all drawings in the plant for which you want to convert the property formats.
-
In Options Manager, select Tools > Convert Existing Property Formats to display the Convert Existing Property Formats Dialog.
-
Select the format options as shown.
-
Select Apply.
-
Open the example drawing and view the Properties window to see the result of converting these property formats:
-
Close the drawing.
-
To convert the second format, Thickness-in(symbol), which affects the Schedule Or Thk property, select the format option as shown.
-
Select Apply.
-
Reopen the example drawing to see the result of converting this property format: