Smart P&ID Share Service and Intergraph Schematic Scheduler Service Overview - Intergraph Smart P&ID - 12 - Installation & Upgrade - Hexagon

• The Intergraph Schematic Scheduler Service is a separate software utility that monitors changes to plant items. Once you setup and start the scheduler service, the service synchronizes the changes with HxGN SDx2. Changes are then flagged for new, modified, or deleted plant items. Updates can then be shared with other Hexagon applications.

  The Intergraph Schematic Scheduler Service needs to be configured using the Schematic Scheduler Configuration Utility. Before you setup a site, using the Configuration Utility, make sure that Smart P&ID Share Service is installed.

• The Smart P&ID Share Service enables integration with HxGN SDx2 and runs in the background. It is available with Smart P&ID as a separate feature and is located in the Select Features to Install section of the Smart P&ID installation DVD. You can also install the Share Service using the Windows Control Panel > Programs > Programs and Features.

Here are the basic steps to setup and configure the services:

1. Ensure Smart P&ID Share Service is installed. See Install or modify Smart P&ID Select Features.

2. Install the Intergraph Schematic Scheduler.

3. Install Intergraph SmartPlant (.NET).

4. Configure the Intergraph Schematic Scheduler.

5. Start the Intergraph Schematic Scheduler Service.

• The Smart P&ID Share Service, Intergraph Schematic Scheduler, and Intergraph SmartPlant (.NET) must be installed on the same workstation where Smart P&ID is installed.

• To create enhanced mapping for integration, you must install Intergraph SmartPlant (COM) along with SmartPlant (.NET).

• To use the Share Service with an Oracle client, you must install Oracle 64-bit client. The 64-bit Oracle client can coexist with the 32-bit client on the same host.