Place Equipment - Intergraph Smart P&ID - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
9 (2019)
Smart Engineering Manager Version
10 (2019)
SmartSketch Version
10.0(2018)
  1. In the Catalog Explorer list view, select the equipment that you want to place.

  2. Drag the item to the appropriate place in the drawing.

  3. Position the item and release to place it.

    SHARED Tip In addition, you can select the item in the Catalog Explorer list view and then click the appropriate point in the drawing to place the item. Press ESC to quit placement mode. Or, you can escape placement mode by right-clicking.

  4. In the Properties window, enter values for the equipment properties in the appropriate rows in the table.

    SHARED Tip You can assign heat tracing to equipment. See Assign Heat Tracing to an Item.

  • After you place items, you can mirror, rotate, or move most items using their component handles. See

  • If the Properties window is not displayed, you can display it by selecting the item and then selecting Edit > Properties on the main menu bar.

  • Flanged Nozzle-Internal, Nozzle-Internal, and Pump Nozzle-Internal can all be placed internally (for example, in a tank). You can use the same steps for placing equipment. For internal placement of equipment, you drag the nozzle to the interior of a tank and place it. If you want the nozzle opening facing to the right, approach the tank from the right when placing the nozzle. In other words, the opening of the nozzle will be placed in the direction that you approach the tank during placement.

  • If you need to place a nozzle so that it is associated with equipment but not attached to it, you can do the following:

    1. Attach the nozzle to the equipment that you want it related to.

    2. Select the nozzle.

    3. While holding down the ALT key, drag the nozzle an arbitrary distance away from the equipment.