Mirror an Item About a Mirror Axis That You Define - Intergraph Smart P&ID - 11 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
11
Smart Engineering Manager Version
12
SmartSketch Version
11
  1. Select one or more items.

  2. On the main toolbar, select Mirror PPM All Outputs Graphic.

  3. Define one end of the mirror axis by clicking in an appropriate empty portion of the drawing or by clicking a keypoint PPM All Outputs Graphic. The software displays the mirror axis and the mirrored items dynamically (that is, as you move your pointer).

  4. Position the pointer so that the mirrored items appear where you want them, and then click. If you want to copy the mirrored items, hold CTRL when you click to place your items.

  • Instead of positioning the mirror axis dynamically, you can use the Position Angle box on the Mirror ribbon.

  • You can use other view manipulation commands, such as Zoom and Pan, while you are using the Mirror command. When you finish manipulating the view, the software returns you to the Mirror command at the point where you were when you started manipulating the view.

  • If an actuator is upside down when placed on an instrument valve, then use Rotate or Mirror to align the actuator in the appropriate position.