Draw Connected Lines and Arcs with FreeSketch - Intergraph Smart P&ID - 10 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
10
Smart Engineering Manager Version
11
SmartSketch Version
10.0(2018)
  1. On the Draw toolbar, select the FreeSketch Command FreeSketch.

  2. On the ribbon, set the line and arc element types with Element Type, and clear the other element types.

  3. Drag to draw a line or arc. When you stop moving the pointer, do not release the mouse button.

  4. Drag to draw a series of line segments and arcs, continuing to hold the mouse button as you draw each line and arc.

    SHARED Tip If you release the mouse button while you are drawing, you can start drawing at the last end point you entered. Confirm that End Point is set on the SmartSketch dialog.

  5. After completing the drawing, release the mouse button.

  • Use Adjust to adjust the geometry you draw.

  • When Adjust is off, the software interprets the exact movements of your pointer.

  • When Adjust is on, the software interprets the lines as horizontal or vertical and the arcs as tangent to the connected elements.

  • If Maintain Relationships is set, the software places relationship handles.

  • The software recognizes relationships at the start point and end point of the line. If Maintain Relationships is set, the software places a connect relationship handle where the two lines meet.