-
Click Renumber to run the CIP m_pck_req_custom.renumber_pos_sub to renumber the position numbers in the Pos and Sub- Position cells.
-
The delivered standard version of this CIP works as follows:
-
In the first step, the MTO line items will be renumbered. The starting value and the increment for the position are defined by the project default ZR_RLIINC, with a default of 1 if the project default is not set. If there are group-by criteria, the sub position will be counted up; the position number stays the same for one group-by criterion.
-
In the second step, the manual line items will be renumbered. The position number will be counted up and the sub position will be 1.
-
-
Line items that have been marked for deletion will be renumbered, too, but you will not see them on the page.