-
On the Home page, click Bill of Materials > BOM Proceures/Macros.
-
Click Add Row in the BOM Procedures block.
-
Enter the name in the BOM Procedures cell and the descriptions of the BOM procedures in the Comments cell.
-
Select Yes or No from the select list in the Display cell to choose which procedures should be displayed on the Maintain BOM page.
Only the first ten BOM Procedures will be displayed on the Maintain BOM page.
-
Select Yes or No from the select list in the Standard cell to make a BOM procedure a standard one.
A BOM procedure marked as Standard cannot modified.
-
Select BOM or Staging from the select list in the Procedure Type cell.
-
Select Staging if you wish to create a Staging Area procedure.
-
Only Staging Area procedures will appear under BOM procedures on the Flat Configurations page.
-
-
Select Position or Node from the select list in the Execution cell.
-
When Node is selected, the BOM Procedure shall run against Nodes only.
-
When Position is selected, the BOM Procedure shall run against Positions only.
-