Space and rack management - Intergraph Smart Materials - 5.1 - Help - Hexagon

Intergraph Smart Materials MobileScan Help (5.1)

Language
English
Product
Intergraph Smart Materials
Subproduct
MobileScan
Search by Category
Help
Smart Materials Mobile Scan Version
5.1

Smart Materials MobileScan uses warehouse type, warehouse purpose, location type, and location purpose in combination with the assigned attribute set to identify the appropriate warehouse when material is received on site.

When you scan a material to transfer, the MobileScan application identifies the warehouses and locations that can receive the material based on the following criteria:

  • Warehouse Types – Specifies the warehouse type such as indoor climate controlled, outdoor, and so on.

  • Warehouse purpose – Specifies the warehouse purpose such as export controlled, cable drums, pipe spools, and so on.

  • Location type – Specifies the location type such as open, rack, container, and so on.

  • Location purpose – Specifies the warehouse purpose such as export controlled, cable drums, pipe spools, and so on.

  • Location size – Specifies the location size in length, width, and height (x, y, and z dimensions).

  • Location weight – Specifies the weight that a location can manage, in kilograms, tons, and so on.

Warehouse Filtering

Warehouse filtering is based on the following criteria:

  • If no attributes are assigned to the scanned item, then the application displays all warehouses.

  • If an item has attributes assigned, then the application filters the warehouses based on the Project Defaults settings in Smart Materials, and displays the warehouses that meet the item requirements.

Example 1:

Item Information:

Barcode = IDGD10000510632

Temperature Control = Yes

Warehouse Information:

Warehouse with temperature control set to Yes = WLAS-T-FRAGILE_LOA

Warehouse with temperature control set to No = WH_FRA_N

The graphic below shows that MobileScan identifies and lists all the appropriate warehouses and does not display warehouse WH_FRA_N which has temperature control set to No.

Transfer In - Temp Control

Location Filtering

Location filtering is based on the following criteria:

  • If no attributes are assigned to an item, then the application displays all the locations.

  • If an item has attributes assigned, then the application filters the locations based on the Project Defaults settings in Smart Materials, displays the locations that meet the item requirements.

Item Attribute

Warehouse/Location Type

Suitable Warehouse

Climate control = Yes

Climate control = Yes

Yes

Climate control = Yes

Climate control = No

No

Climate control = Yes

Climate control = Not Defined

Yes

Climate control = No

Climate control = Yes

No

Climate control = No

Climate control = No

Yes

Climate control = No

Climate control = Not Defined

Yes

Climate control = Not Defined

Climate control = Yes

Yes

Climate control = Not Defined

Climate control = No

Yes

Climate control = Not Defined

Climate control = Not Defined

Yes

Example 2:

Item Information:

Barcode = IDGD10000510632

Temperature Control = Yes

Warehouse Information:

Warehouse with temperature control set to Yes = WLAS-T-FRAGILE_LOA

Warehouse with temperature control set to No = WH_FRA_N

Location Information:

Location with temperature control set to Yes = LOC_TEMP

Location with temperature control set to No = LOC_NOK

The following graphic shows that MobileScan identifies and lists all the appropriate locations and does not display location LOC_NOK which has temperature control set to No.

Transfer In - Temp Control