Geostandard - Intergraph Smart Materials - Version 10.1 - Administration & Configuration - Hexagon

Intergraph Smart Materials Integration (10.1)

Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Administration & Configuration
Smart Construction Version
8
Smart Materials/Smart Reference Data Version
10.1

Here you specify how Smart Materials will look for the geostandard. There are the following possibilities:

  • S.30.01 CC - Using this method, the PDS interface will search for the geostandard in the commodity code tables. The mapname for the Smart Materials table on A50.I.01 must be identified by CL575. You can have more than one table for this purpose. Map additional tables by appending a sequential number to the mapname like <mapname>_1, and so forth on A.50.I.01.

  • S.20.08 - This method means that for every Smart Materials part a geostandard must be mapped on S.20.08. To identify the Smart Materials table for the PDS interface on A.50.I.01, use translation CL575. You can have more than one table for this purpose. Map additional tables by appending a sequential number to the mapname like <mapname>_1, and so forth on A.50.I.01.

  • Table Detail ID - The geostandard is in the commodity code, and the internal table detail ID - which is invisible on the screens - is taken. The value in the 575Start field can be used as an additive value. 575 Start is an additive value if you use the Table Detail ID method or Function for the geostandard. For more information, see the online Help.

For the S.30.01 or S.20.08 methods, you must enter into the Source field the attribute from which the geostandard will be read.

The following possibilities exist for both methods:

  • Table Detail - value in TD Code is taken

  • S.20.I.01 - translated value from S.20.I.01 is taken

  • ATTR_CHAR1 - value of ATTR_CHAR1 is taken

  • ATTR_CHAR2 - value of ATTR_CHAR2 is taken

  • ATTR_CHAR3 - value of ATTR_CHAR3 is taken

  • ATTR_NUM1 - value of ATTR_NUM1 is taken

  • ATTR_NUM2 - value of ATTR_NUM2 is taken

  • ATTR_NUM3 - value of ATTR_NUM3 is taken