Model Code - Intergraph Smart Materials - Version 10.1 - Administration & Configuration - Hexagon

Intergraph Smart Materials Integration (10.1)

Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Administration & Configuration
Smart Construction Version
8
Smart Materials/Smart Reference Data Version
10.1

Here you specify the method and source of search for the model code of the components.

Here are the following possibilities for the method:

  • Partname - This method means that the model code produced for PDS is the same as the Smart Materials part name on S.10.03. No further mapping or data entry is necessary if this method is used.

  • S.20.08 - This method means that for every Smart Materials part a model code must be mapped on S.20.08. To identify the Smart Materials table for the PDS interface on A.50.I.01, use translation MODEL. You can have more than one table for this purpose. Map additional tables by appending a sequential number to the mapname like <mapname>_1, and so forth on A.50.I.01.

  • ATTR_CHAR1-3 - This method means that the model code for a part is located as a variable attribute in ATTR_CHAR1, 2, or 3 on the physical Smart Materials table m_parts. For this method, you must assign an attribute to the columns ATTR_CHAR1, ATTR_CHAR2, or ATTR_CHAR3 of table M_PARTS on A.50.03.