Short Code – Gtype Mapping - Intergraph Smart Materials - Version 10.1 - Administration & Configuration - Hexagon

Intergraph Smart Materials Integration (10.1)

Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Administration & Configuration
Smart Construction Version
8
Smart Materials/Smart Reference Data Version
10.1

Select the Smart Materials short codes. Changing or deleting is not possible here. Smart Materials short codes are defined on the S.10.08 screen if one is missing.

In the second block, you create the assignment of the Smart Materials short codes to the PDMS terms.

In the GType field, enter a Gtype. The entry is checked against the S.20.I.03 tablename for Gtypes (Translation = GYTPE). If a Gtype is missing, it must be entered on S.20.I.03. An LOV is available and contains all valid Gtypes from S.20.I.03.

During the transfer, the Gtype is reduced to 4 characters.

In the GType Config field, select a pre-defined GType configuration from the LOV.

With the PBORx check boxes, you can define at which places the nominal sizes should be stored in the spec file.

You can order the PBOR values in the Specon file such that the larger bore value comes first and then the smaller bore. For this purpose, the Order PBORs check box must be selected. If this check box is selected, the PBORs are ordered from larger bore to smaller bore for the selected GType.