Version 2020 (10.0.0)
-
The new DBA settings ESUP_2FA and ESUP_2FA_VAL, introduced with 2020 SP3 (10.0.3), can be used to activate the two-factor authentication in Smart Materials Portal (see ESUP_2FA and ESUP_2FA_VAL) (CR-MA71443).
-
Introduced with 2020 SP1 (10.0.1):
It is now mandatory that the DBA settings SSO_AUTH_HEX_IV, SSO_AUTH_PASS and SSO_AUTH_VERIF are specified to enable the password encryption. If these settings are not defined, Portal will not work. (see SSO_AUTH_HEX_IV, SSO_AUTH_PASS, SSO_AUTH_VERIF) (TR-MA69005)
-
Introduced with 2020 SP1 (10.0.1): The new DBA Settings ESUP_TERMS_COMP, ESUP_TERMS_DATE, ESUP_TERMS_PP, ESUP_TERMS_TAC can be used to enable the Terms and Conditions dialog in Portal (see ESUP_TERMS_COMP, ESUP_TERMS_DATE, ESUP_TERMS_PP, ESUP_TERMS_TAC) (CR-MA68308).
-
The new DBA setting ESUP_VIEW_REPORTS can be used to enable a CIP when View Reports is used (see ESUP_VIEW_REPORTS) (CR-MA54897).
Version 2016 R4 (8.4.0)
-
Smart Materials Portal prompts can now be translated using a glossary (see Use a Glossary) (CR-MA59118).
-
The Register button on the Portal Login page can now be disabled (see Register Button) (CR-MA51554).
-
New DBA settings COMPANY_PROFILE_APT and QUALIFICATION_APT to assign approval templates which are used to fill the approval sequence on submitting company profile and qualifications from Portal (see COMPANY_PROFILE_APT and QUALIFICATION_APT) (TR-MA59860).
-
The new project default ZP_COR_ISD controls if only issued change order requests (CORs) are available to subcontractors in the Portal (see ZP_COR_ISD) (TR-MA57319).
Version 2016 R3 (8.3.0)
-
With the new project default ZP_QU_RECV you can define when the quote receipt date is set, either on first edit of the inquiry or on submit of the finalized quote (see ZP_QU_RECV) (CR-MA47203).
-
With the new DBA setting ESUP_CCI_STATE, you can control the default value of the CCI radio group on the Quote Reference and Validity screen, when first opening a quote in Portal (see ESUP_CCI_STATE) (CR-MA47286).
-
Added missing project defaults ZP_BIDWARN, ZP_CHKPPL, ZP_COR_LI, ZP_EDITPPL, ZP_LOT_CHK, ZP_LNK_MOC, ZP_PL_LOT, ZP_PPL_LOT.
Version 2016 R2 (8.2.0)
-
With the new DBA setting ESUP_QD_VALIDITY, you can now control if particular fields are mandatory on the Portal inquiry landing page. (see ESUP_QD_VALIDITY) (CR-MA32347).
-
With the new DBA setting CODE_OF_CONDUCT, you can now control if potential suppliers can only provide answers to company profile and qualifications questions in the Portal after accepting the code of conduct. (see CODE_OF_CONDUCT) (CR-MA38253).
-
With the new DBA setting RFI_DELETE you can control if Portal users are allowed to delete requests for information (see RFI_DELETE) (CR-MA40344).
-
You can now view and edit quote detail properties, which are defined by means of an attribute set (see Add Properties to Quote Details Grids) (CR-MA40679).
-
You can now add up to five properties to Quotation Details grids, which are filled using CIP procedures (see Add CIP fields to Quote Details Grids) (CR-MA40631).
-
With the new DBA setting ESUP_PROTECT_OC you can protect the other cost descriptions from being updated in the Portal (see ESUP_PROTECT_OC) (CR-MA42042).
-
The new DBA setting ESUP_EXCL_TRAFFIC can be used to exclude the Traffic module from the Portal (see ESUP_EXCL_TRAFFIC) (CR-MA42042).