Build Idents - Intergraph Smart Materials - Version 2020 (10.0) - Training - Hexagon

Intergraph Smart Materials Classic Lab Tutorials (2020)
Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Training
Smart Materials/Smart Reference Data Version
2020 (10.0)

Purpose

This section explains how to build idents based on pre-defined commodity codes, object parameters, geometrics, and commodity geometric relations. Ident generation completes the component definition by adding the dimensional properties to the commodity codes.

Exercise

  1. Open the S.80.01 Ident Management screen from the Smart Reference Data > S.80 Idents menu branch. The screen opens in enter query mode; all fields are empty and are displayed with a yellow background.

  2. Enter the previously created commodity code BE9LABMBEACLAAP in the Commodity Code field.

  3. Click the Run Query button to display the selected commodity code with its details.

  4. Click the Commodity Geometric Relations tab to verify the available relations for the selected commodity code. Use the button to see the reasons why a geometric detail record cannot be used for building idents.

  5. Click the Object Parameter tab to verify the available object parameter with its details for the selected commodity code.

  6. Click the Only new Idents tab.

    The records on this tab are displayed based on the existing commodity geometric relations of the commodity code. These records can be used to build idents.

  7. Click the Enter Query button, enter S-STD in the Sch1 field, and click the Run Query button to restrict the displayed records to those with a schedule of S-STD.

  8. Click the button to build idents for the previously queried and restricted records.

    A message appears to inform you about the number of idents that were built; click OK to continue.

  9. Click the Existing Idents tab to verify the idents that were built for the selected commodity code.

  10. Click the Only new Idents tab again to display the remaining geometric details that can be used to create further idents.

  11. Click the button to generate all remaining idents for the selected commodity code.

  12. Click the Existing Idents tab and select any ident by clicking on the ident code. The ident layout, which was created by combining the commodity code layout with the object parameter layout, is displayed in the Ident Layout field. This is the description text of the component used in the Smart Materials downstream modules.

  13. Close the screen by selecting File > Close All from the main menu.