ZP_RCV_TOL - Intergraph Smart Materials - Version 10.2 - Administration & Configuration - Hexagon

Intergraph Smart Materials Classic Administration (10.2)

Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Administration & Configuration
Smart Materials/Smart Reference Data Version
10.2

Receiving tolerance for closing order.

With this project default, you define the tolerance that is allowed for receiving material to close an order. The value represents a percentage value.

If the tolerance is 0 (default value), check box All material received in screen P.70.41 Close Order and check box Received in screen PX.20.71 Close Order are only checked if either all material or even more has been received (and posted) on site.

If the tolerance is greater than 0, these check boxes are also checked if less material has been received. To what degree lower quantities are accepted depends on the value of the tolerance.

If a quantity of 100 is expected for an order line item and only a quantity of 90 has been received, the material is regarded as being received if the tolerance is 10 or even more. If the tolerance is less (for example, 5), the material is not regarded as being received. In that case, a minimum quantity of 95 must be received to reach that status.

  • Module(s) affected by this setting: P7041, PX2071

  • Default value: ./.

  • List of Values: ./.