On the A.20.11 Project Group Defaults screen, you can define the project group defaults (parameter defaults for project groups). Only settings that are meaningful outside a project context are available. Parameters that depend on the data of a specific project cannot be defined here. Technically speaking, only settings with a static domain of allowed values or settings that allow entry of free text can be maintained here. Furthermore, only those defaults that can be set at any time regardless of any check conditions are available. In other words, only those parameters that have check conditions defined on A.30.05 Parameter are displayed.
The Query Options group at the top of the Project Group Defaults block can be used to limit the displayed project defaults.
These are the available options:
-
All (Default) - All parameters are displayed.
-
Mandatory - Only mandatory parameters are displayed.
-
With Value - Only parameters with a value assigned are displayed.
-
Without Value - Only parameters without a value assigned are displayed.
-
Mandatory No Value - Only mandatory parameters without a value assigned are displayed.
-
Mandatory With Value - Only mandatory parameters with a value assigned are displayed.
The available project group defaults are displayed on tabs, divided among the associated Smart Materials modules. The following table lists each tab, module, and project default prefix.
|
Tab |
Associated Module |
Prefix |
|---|---|---|
|
General |
All |
ZX_ |
|
SPRD |
Smart Reference Data |
ZS_ |
|
E&PI(BOM) |
Smart Materials E&PI(BOM) |
ZB_ |
|
E&PI(Req) |
Smart Materials E&PI(Req) |
ZR_ |
|
MSCM |
Smart Materials MSCM |
ZP_ |
|
Site |
Smart Materials Site |
ZC_ |
|
Integrator |
Smart Materials Integrator |
ZI_ |
|
Account Codes |
Smart Materials Account Codes |
ZJ_ |
|
Others |
Others |
ZO_ |
If you create a new project group or a new project, you can use the Reconcile All functionality on this screen. When you click the Reconcile all defaults button, the software will copy all parameter definitions from A.30.05 for parameters starting with Z and with parameter type Administration to all project groups and projects in which they are not yet present. The settings of these copied parameters will be empty, indicated by the value ./.
The allowed values for each project default are shown by LOV for most of them. To assign a value to a project default, open the LOV on the Value field, select a value from the list, and click OK to close the LOV. Project defaults without an LOV available allow you to enter any free text.
