Create a sample Smart Isometrics project - Intergraph Smart Isometrics - 2019 R1 - Installation & Upgrade - Hexagon PPM

Intergraph Smart Isometrics Installation

PPMProduct
Intergraph Smart Isometrics
PPMCategory_custom
Installation & Upgrade
Version_IDataIntegrator
2019 R1 (8.1)
Version_SPIso
2019 R1 (7.1)
Version_SPSplgn
2019 R1 (9.1)

The Create Tutorial Project utility is installed with the software. You can use this utility to create a sample isometric directory (SampleIsoDir) that contains a sample project (called SPITutorial). By default, the Smart Isometrics Tutorial project contains a complete set of sample isometric drawing styles that are used to determine the content and appearance of an isometric drawing, as well as sample material data and sample piping specifications, as well as sample material data and sample piping specifications.

Although you can use the template drawing styles, sample material data, and sample piping specifications out-of-the-box, this sample data is intended for instructional purposes while learning the software and should not be used for live projects. We recommend that you create your project hierarchy using I-Configure, configure your project-specific styles using Isogen Configuration, and create project-specific reference data using Material Editor.

  1. Click Start > All Programs > Intergraph Smart Isometrics > Tools > Create Tutorial Project.

    When you run the Create Tutorial Project utility, the installation process deletes the current Tutorial project structure. To avoid accidentally deleting "live" project data, do not create projects under the sample isometric directory or project structure.

    The software opens a window that allows you to view processing progress.

  2. When processing completes, click OK in the Create Tutorial Project Log window.

    The software creates a fully configured project hierarchy on the local computer. An example of the Smart Isometrics tutorial project hierarchy is shown below.

  • To run the utility from the command line, type -a SPIsometrics.

  • The table below lists the sample isometric drawing styles that are delivered with the Create Tutorial Project utility.

Isometric Style Name

Purpose

Output

Check

Checking the routing of the pipeline against the 3D model. The isometric drawing is configured for internal use and is not for issue.

Contains an overall dimensioning style with minimum detailing. There is no integral BOM list and no external reporting.

Final-Basic

Production release

Contains a fully detailed representation of the pipeline, complete with Fabrication and Erection BOM lists. The Material Control File report is also generated.

Final-Cut-List

Production release

Contains a fully detailed representation of the pipeline, complete with Fabrication and Erection BOM lists. Pipeline cut piece references are output along with an integral cutting list table.

Final-Erection

Production release

Contains a fully detailed representation of the pipeline, complete with an Erection BOM list.

Final-Fab

Production release

Contains a fully detailed representation of the pipeline, complete with a Fabrication BOM list.

Final-Weld-Box

Production release

Contains a fully detailed representation of the pipeline, complete with a Fabrication and Erection BOM lists. Pipeline welding numbering references are output along with an integral welding list table.

Spool

Designed for release to the Fabricator

Contains a fully detailed representation of the separate spool sections of the pipeline, complete with a Fabrication BOM list. Pipeline welding numbering and cut piece references are output along with the welding and cut list tables. The Material Control, Cut List, Weld Summary, and Spool Information file reports are generated.

Flat-Spool

Designed for release to the Fabricator

Contains a fully detailed representation of the spool sections of the pipeline, complete with a Fabrication BOM list. The spools are laid out in a flat orientation to maximize the number of legs flat with the fabrication work surface. Pipeline welding numbering and cut piece references are output along with the welding and cut list tables. The Material Control and Weld Summary file reports are also generated.