Weld and Part Number Management - Intergraph Smart Isometrics - Help - Hexagon PPM

Intergraph Smart Isometrics Help

Language
English
Product
Intergraph Smart Isometrics
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
2019 R1 (7.1)
Spoolgen Version
2019 R1 (9.1)

As an alternative to allowing Isogen to automatically assign weld and part numbers, Smart Isometrics delivers a group of commands on the Tools menu that allow you to manage them directly.

Welds and parts, or components, are numbered in groups. Each group has an information item that indicates the highest number in the group. Weld and part numbers for specific items are stored in the Weld Number and Part Number properties. The exact grouping of items within the groups depends on the numbering scheme used. There are several different possible numbering schemes.

The software also provides a feature to check for duplicate weld or part numbers. The software scans the file and reports any welds or components that have incorrectly duplicated numbers.

  • In the PCF, weld number and part number properties are defined using REPEAT-WELD-IDENTIFIER and REPEAT-PART-NUMBER attributes, respectively.

  • Use the Properties window to define the Part Number and Weld Number attributes.

    Weld Part Properties

  • The current version of the software does not allow you to create Highest Weld Number or Highest Part Number information elements directly in the software. However, these information elements are required by Isogen to number any un-numbered items, such as implied welds. Consequently, when numbering welds manually, you must do one of the following:

    • Verify that all welds are numbered and that drawing generation does not cause any implied welds to be created.

    • Use the Assign to New option to indirectly create a Highest Weld Number information item.

Assign Part Numbers dialog box

Assign Weld Numbers dialog box

What do you want to do?