View a Drawing Block in a CAD Application - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2018 (12.0)
  1. In the Domain Explorer, expand loop 101-F-100 by double-clicking its icon.

    The software displays all the tag numbers associated with this loop:

  2. Double-click tag 101-FE-100 to display the drawing blocks associated with it.

    SHARED Tip The Orifice Plate SmartSketch block is indicated with a green icon because you associated this block with the tag number using the automatic block assignment method (via instrument type).

  3. Right-click the block, and on the shortcut menu, click Reports > View Block in CAD Application.

    The drawing block for the selected tag is displayed in your CAD application, including the macros. (The example shows how the drawing appears in SmartSketch – what you see may be slightly different depending on the CAD application you are using).

  4. Expand each of the tags in loop 101-F-100 and observe all the blocks that you associated previously.

    SHARED Tip The view obtained is in accordance with the hierarchy level selected. If you select a loop, the software displays all the drawing blocks for that loop. If you select a tag number, the software displays the blocks attached to that tag number; selection of a block displays that block only. When viewing drawing blocks before generation, the software displays the blocks with macros only.

  5. In the Domain Explorer, select loop 101-F-100.

  6. Right-click the loop, and on the shortcut menu, click Reports > View in CAD Application to view the drawing blocks attached to the loop.