Create an Analog Output I/O Card and a 4-Channel Terminal Strip within the New Reference DCS Panel - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2018 (12.0)

After creating the required racks and slots in the new reference DCS panel, you can now create an analog output I/O card.

  1. In the Reference Explorer, expand the panel DCS-1 to display all its child items.

  2. Under File Number 1, right-click Slot 2 and then on the shortcut menu, click New > I/O Card.

  3. On the New Wiring Equipment dialog box, type the new I/O card name
    4 CHANNEL A/O CARD and click OK.

  4. On the Wiring Equipment Properties – I/O Card dialog box, on the General tab, accept the I/O card name.

  5. Click the Control System tab and from the I/O type list, select AO.

  6. Click OK to complete the creation of the new I/O card.

  7. Right-click the new I/O card 4 CHANNEL A/O CARD and on the shortcut menu, click New > Terminal Strip.

  8. On the Terminal Strip Configuration dialog box, next to Configuration name click New.

  9. On the Number of Terminals in Pattern dialog box, type 3 and click OK.

  10. Define the terminal configuration as shown below .

  11. Define the Terminal Numbering Pattern as shown below.

  12. Click Save and then Create.

  13. On the Terminal Strip Properties dialog box, under Terminal strip, type TS 4 CHANNELS and click OK.

    The Reference Explorer should now display the following items in the DCS Panels folder: