Define Line Process Data - Intergraph Smart Instrumentation - 13.1 - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
13.1
  1. On the toolbar, click Process (Line).

  2. On the Select Line dialog box, select the Show all line types check box.

    Your line data should appear as shown:

  3. Select line number 4"-P-1501-11H and click OK.

  4. On the Process Data dialog box, from the Fluid state list, select Liquid, and then, click OK.

  5. In the Line Process Data - 4"-P-1501-11H window, in the GENERAL section, type the values for the fluid phase and fluid name values as shown.

  6. In the PROPERTIES section, type the property values in metric units of measure, as shown.

    SHARED Tip You must first modify the Units values, before entering the numerical values in @Minimum, @Normal, and @Maximum

  7. On the toolbar, click Save Icon 16bit (Save).

  8. On the toolbar, click (Report)

  9. When prompted to preview the report, click Yes to open the print preview of the line process data report.

  10. On the toolbar, click Revisions icon 16bit (Revisions).

  11. On the Revisions dialog box, type the revision data as follows:

    1. From the Revision method list, select 0,1,2…

      SHARED Tip When you first select a revision numbering method, several options are available to you, including preliminary revisions (designated by P0, P1, P2…). Once you select one of the other revision methods, you will not be able to return to the preliminary revision method and this option will be disabled.

    2. Click New to type a revision row with the 1(one) revision number and the current date.

    3. In the By field, type your initials.

    4. In the Description field, type For Instrumentation.

      The dialog box should appear as shown:

  12. Click OK to close the Revisions dialog box.

    SHARED Tip After you have made several revisions, you can update them in batch mode. In the main window of any Smart Instrumentation module, click Tools > Global Revisions. For an example, see Make Global Revisions for Specifications.

  13. Close the print preview window.

  14. Close the Line Process Data window.

  15. On the toolbar, click Process (Line) to reopen the Select Line dialog box, and select the Show all line-types check box.

    In the PD Exists column, the software now indicates that process data exists for line 4"-P-1501-11H.

  16. Click Cancel to close the Select Line dialog box.