Remove a Tag from a Multi-Tag Spec - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

Use this procedure to remove instrument tags from a multi- tag (see list) specification. When removing a tag, it is possible to retain in the database or delete the tag spec data defined in the see list.

  1. In a multi-tag specification, on the Multi-Tag List tab, select the instrument tags that you want to remove from the see list.

  2. On the Actions menu, select Remove Tag.

  3. In the message that opens, select Yes when prompted to remove the tags.

  4. When prompted to clear the specification data, do one of the following:

    • Select Yes to delete from the database the see list values defined for the tag.

    • Select No to preserve the tag see list values in the database.

    SHARED Tip If you selected No, and then generate a specification for the tag that you removed, the software retrieves the see list values from the database and displays them in the generated spec. To display the values, it is only crucial that the spec form on which you base the new spec contains the columns that appeared in the see list of the tag that you removed. This means that the form of the new spec does not have to be the same as the form of the spec from which you removed the tag, and that the type of the new spec can be either single-tag or multi-tag.

  5. On the toolbar, select Save Icon 16bit to save the changes.

  • You cannot remove the master tag unless you redefine it as a standard tag.

  • The software does not allow you to remove tags that are currently assigned to a Specification Binder package or that were revised in the Document Binder module.

See Also

Change the Master Tag Definition
Multi-Tag Spec Formats