Generate a Spec for Multiple Process Data Cases - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1
  1. In the Specifications module, select Actions > Open Specification.

  2. On the Open Specification dialog, from the Item type list select Instrument.

  3. With the cursor in the Item number box, do the following:

  4. Select Find to open the Find Items dialog.

  5. Filter the grid for the parameters for the properties that you want to find.

  6. Select the instrument tag for which you have calculated a hybrid case in the Calculation module.

    SHARED Tip Under Search parameters, the Case list displays all the available cases defined in the Process Data module.

  7. On the Find Items dialog, select OK to accept your selection and return to the Open Specification dialog.

  8. With the cursor in the Form number box, do the following:

    1. Select Find to open the Select Specification Form dialog.

    2. Select the appropriate form (not form #76, which designed for the control valve hybrid case), and then select OK.

    SHARED Tip If the value in the Form number box is view-only, this means that you have already created previously a specification for a different case of the same tag. After creating a spec for a tag case, the software assigns the same spec form to all other cases of the same tag.

  9. On the Open Specification dialog, select OK to open the New Specification dialog, and then proceed with spec creation.