Advanced Filter Definition (Cables) Dialog - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

Allows you to set additional filter definitions for the Cables and Cross Cables folder. You can filter for cables according to their connections and for cables that are connected to a specific Foundation or Profibus segment.

Connection Criteria

Allows you to filter the cables according to their connections.

Look for connections

Select to include the connection criteria in the filter condition. This activates the check boxes under Connection and under Connected to. Clear this check box not to include any of the connection criteria in the filter condition. Clearing this check box disables the Connection and the Connected to check boxes.

Connection

Allows you to define a filter according to a cable connection:

No connections on either end

Includes the cables that are not connected to anything on either wire ends.

At least one wire connected on one end only

Includes the cables that contain at least one wire that is only connected on one of its ends.

At least one wire connected on both ends

Includes the cables that contain at least one wire that is connected on both wire ends.

Connected to

Allows you to define a filter according to the type of panel that is connected to the cable. This selection sets connection criteria for cables that have at least one wire connected to one or both ends.

Junction boxes

Includes all the cables that are connected to junction boxes.

Marshaling racks

Includes all the cables that are connected to marshaling racks.

Cabinets

Includes all the cables that are connected to cabinets.

DCS panels

Includes all the cables that are connected to DCS panels.

PLC panels

Includes all the cables that are connected to PLC panels.

Device panels

Includes cables that are connected to device panels. Select one of the radio buttons to include or exclude device cables from your filter.

Cable Associations

Allows you to filter the cables according to their associations.

Fieldbus segment

Allows you to filter for cables associated with a specific Foundation Fieldbus or Profibus segment.

Display telecom cables only

Allows you to filter for cables connected to telecom items.

Display pre-assigned device cables only

Allows you to filter for pre-assigned device cables by selecting a pre-assigned junction box and terminal strip. Note that this option does not apply to Telecom cables or Fieldbus home-run cables.

Pre-assigned junction boxes

Allows you to select a pre-assigned junction box.

Pre-assigned terminal strips

Allows you to select a pre-assigned terminal strip that belongs to the selected junction box.

Cables without sets

Allows you to filter only for those cables that have been created without sets and wires. This feature is useful when creating cable block diagrams.