This procedure shows how to assign connector pins to cable wires.
-
In the Domain Explorer or Reference Explorer, do one of the following:
-
To create a new cable, right-click the Cables folder and select New > Cable.
-
Right-click an existing cable, and select Properties.
-
-
Modify cable properties as needed. For details, see Create a Cable.
-
Select Connectors.
-
In the Connector Assignments dialog, select the cable end tab, End 1 or End 2, to manage connector-wire associations.
-
Do one of the following:
-
To validate that pin polarities that you set for this cable end are consistent with wire polarities, select the Polarity validation check box.
-
To skip polarity validation, clear the Polarity validation check box.
-
-
For each connector pin, under Wires per Pin, select the number of wires that you want to assign to the pin.
-
Under Cable Set, select the Cable Set from which you are assigning a wire to the current pin. (Repeat this for each connector pin.)
-
Under Wire, select the wire that you assign to the pin. (Repeat this for each connector pin.)
-
The value that you enter under Wires per Pin determines the number of rows displayed for a given pin.
-
The software does not allow you to edit pin-wire assignment properties of a connector that is connected (in the Connection window).