Copy from Vendor Data to Working Data - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

This feature allows you to copy certified vendor data to the working data of a selected instrument. Copying vendor data is only possible if the dimensional group, manufacturer, model, and the process connection data match the working data. You can select numerous instruments for which you want to copy vendor data. For each selected instrument, the software can then search for matching dimensional group, manufacturer, model, and process connection values.

  1. In the Working Data window, highlight the tag numbers for which you want to copy vendor data.

  2. Select Actions > Copy from Vendor to Working.

    The software searches for instruments with matching dimensional group, manufacturer, model, and process connection values. After matching values are found, the Copy from Vendor to Working dialog opens.

  3. On the Copy Vendor to Working dialog, examine the data displayed in the following boxes:

    • Instruments selected — This box shows how many tag numbers you selected for which you want to copy vendor dimensions.

    • Instruments found — This box shows how many tag numbers in the working data match the values in the vendor data.

    • Instruments with incomplete data — This box field shows how many tag numbers how many tag numbers have incomplete vendor data, incomplete working data, or data mismatch in the fields that must be identical in both vendor and working data.

    To be able to copy vendor data to working data, make sure that the following vendor data properties match the corresponding working data properties: inlet, outlet, #3, and #4 connection points and their units of measure, instrument manufacturer and model.

  4. In the Set Status section, select the dimensional data status of the working data as required : Preliminary, Design, or Certified.

  5. Select Copy.

  • For every instrument with matching values, vendor dimensional values are copied including the vendor revision number. This data is marked as copied to working data.

  • If the instrument contains no working data and all required dimensional data is defined, the data is marked as ready for release.

  • If the instrument contains working data, you are prompted if you want the working data to be overwritten by the vendor data. The copied dimensions are marked as suspected data and copied from vendor.