Create a Multi-Input Instrument with Plug-and-Socket Connections for a Serial Loop Interface - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1
  1. In the Reference Explorer, create reference panels that feed into the multi-input device panel.

  2. In the Reference Explorer, create a reference multi-input device panel with plug- and-socket connections.

  3. In the Reference Explorer, create reference spur cables.

    • For both types, in the Cable Properties dialog, under Cable class, select Conventional.

    • Use the same connector type required for the device panels.

    • Set the male/female property for coupling with the device panels.

    • For the instrument type that you will use with the multi-input device panel, create one connector only (for the device panel end). Leave the second end without a connector, for terminal connection to the DCS I/O card.

  4. In the Instrument Index module, create instrument type profiles for instruments with plug-and-socket multi-input serial interface and instruments that feed into the multi- input instrument.

    • For each instrument type, on the Wiring and Control System tab, select the reference device panel and reference cable that you created for each type.

    • For the instrument type upon which you base the multi-input device panel, make sure that you select the Serial Interface I/O type in the Instrument Type Profile dialog.

  5. In the Instrument Index module, create the following, based on the instrument types that you defined:

    • Create the instrument tags that feed into the multi-input instrument tag.

    • Create the multi-input instrument tag. Make sure that in the New Tag Number dialog, you select Fieldbus from the Tag class list.

  6. In the Domain Explorer, right click the multi-input device panel that was created, and select Actions > Connection.

  7. In the Plug-and-Socket Connection window, do the following to connect the input device cables to the multi-input device panel.

  8. In the Domain Explorer, expand the device cables that feed into the multi- input device panel.

  9. Drag the appropriate cable connectors to the in-ports of the multi-input device.

  10. In the Domain Explorer, right- click the DCS panel to which you connect the output of the multi-input device panel, then select Actions > Connection.

    SHARED Tip Make sure that the I/O type of the I/O card to which you connect the multi-input device is SI.

  11. In the Connection window, connect the output cable of the multi-input device panel to the DCS.

  12. To view the I/O assignment of the signals, select Actions > I/O Assignment.