The following list describes some of the reports that are available in the Calibration module.
Instrument List
Displays a list of the available instruments organized by system category. Instruments that are associated with more than one category appear once under each category.
Instrument Structure
Displays a list of the available instruments organized by the loops to which they belong.
Calibration Codes — By Instrument Type
For the selected code category, displays the number of instruments for which each particular code value applies, organized by instrument type.
Calibration Codes — Monthly Analysis
For the selected code category, displays a month by month analysis over the specified date range of the number of instruments for which each particular code value applies, organized per loop.
Result Code — Result Analysis
Displays for the specified date range an analysis of the instruments per result code. Note that the result code is a user-defined property that has nothing to do with the Calibration result property, which the software calculates, and which can have the value Passed or Failed.
Check List — By Loop
For one or more selected loops, displays a check list for each instrument showing principal settings and input data used for calibration. You can print this report and write As Found, As Left, and code values as needed.
Check List — By Tag
For the instruments selected using the filter, displays a check list showing principal settings and input data used for calibration. You can print this report and write As Found, As Left, and code values as needed.
History Event Details
For one or more selected loops, displays a brief summary of the calibration history of all the instruments in those loops, including loop errors where relevant.
Calibration Results
For the instruments selected using the filter that have either passed or failed the calibration, displays a summary of each instrument's calibration settings and results.
Calibration Equipment
Allows you to specify one or more items of calibration equipment and displays the frequency of calibration failure for each item of calibration equipment. You can then analyze the results to find out if there is a fault in the calibration equipment itself.
Loop Error
For one or more selected loops for which the loop error was calculated, displays the error variation over the specified date range at the specified calculated point. This report is useful for checking the zero drift of a particular loop over time.
Component Error
For one or more selected instruments, displays the error variation over the specified date range at the specified calculated point. This report is useful \ for checking the zero drift of an instrument over time.
Alarm / Trip Points Summary
Generates a summary of the trip and alarm point data of all selected tags.
Calibration Certificate (available from main Calibration module window only)
Generates a summary of the selected tag's calibration results.
Calibration Results Report
Generates a summary of the selected tag's calibration results, calibration settings, a graphic representation of the error percentage, and test equipment used for calibrating this tag.