You enter the required alarm / trip settings in the appropriate Point data window. You can specify up to six trip or alarm indication points. For each point, you select a unit of measure, enter the point values and direction, and type a brief description.
-
Open the Tag Calibration Settings window for an instrument tag.
-
In the Alarm / Trips section, for First Point, type the required values or select them from the lists. When done, define other calibration points as required.
If you are defining calibration settings for a tag number associated with process
data, you can copy existing process data minimum and maximum range values. For details,
see Copy Existing Process Data.
-
Select Save
to save all your calibration settings.