Adapt Unit of Measure Codes - Intergraph Smart Instrumentation - Help

You can adapt system codes and unit of measure codes only if you selected a source system. For a list of system codes you can adapt, see Unit of Measure Codes Table.

1. Select Codes > Adapt Unit of Measure Codes.

2. On the Adapt Unit of Measure Codes dialog, from the Source System list, select the source system whose codes you want to adapt. The available source systems are the ones you entered on the Source System List dialog.

3. From the Unit of measure type list, select the unit of measure category whose codes need adapting.

4. To set the code values, do the following:

   1. In the Codes pane, select the Source UOM Code field of the appropriate code.

      You can only set the values of source codes where the Source UOM Code field color is either light blue or white.

   2. Type the source value which corresponds to the target unit of measure code value.

   3. Select Unused to clear the currently selected source unit of measure code value.

   4. Select Duplicate to specify an additional source unit of measure code value for the target unit of measure code value currently selected in the data window.

5. Repeat steps 3 and 4 for every required Smart Instrumentation module.

6. Repeat steps 2 through 5 for other source unit of measure whose codes need adapting.

7. Do one of the following:

   • Select OK to save the changes you made to the current unit of measure code settings and close the Adapt Unit of Measure Codes dialog.

   • Select Apply to save the changes you made to the current unit of measure code settings and keep the Adapt Unit of Measure Codes dialog open. This way you can save the portion of the work you have done so far and keep working with the Adapt Unit of Measure Codes dialog.