Create a Plug-and-Socket Device Panel - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

This procedure explains how to create a new plug-and-socket device panel.

  1. Press F7 to open the Domain Explorer.

  2. Double-click the Panels by Location folder, right-click a location and then select New > Device Panel (Plug- and-Socket).

    OR

    Double-click the Panels by Category folder, right-click the Device Panels folder and then select New > Device Panel (Plug-and-Socket).

  3. In the Plug-and-Socket Box wizard, follow all the instructions carefully and then select Next until you complete the wizard.

  • You can select next to a list arrow to access the appropriate supporting table. This allows you to add, edit, or delete select list items.

  • When defining the plug-and- socket box connectors, under Connector type definition display, Smart Instrumentation displays the connector sequence, the appropriate pin number, and the pin polarities according to the configuration of the connector than you selected.

See Also

Profibus Design Common Tasks