Advanced Filter Definition (Cables) Dialog Box - Intergraph Smart Instrumentation - 13.1 - Administration & Configuration - Hexagon PPM

Intergraph Smart Instrumentation Administration

Language
English (United States)
Product
Intergraph Smart Instrumentation
Search by Category
Administration & Configuration
Smart Instrumentation Version
13.1

Allows you to set additional filter definitions for the Cables and Cross Cables folder.  You can filter for cables according to their connections and for cables that are connected to a specific Foundation or Profibus segment.

Connection criteria

Allows you to filter the cables according to their connections.

Look for connections — Allows you to include the connection criteria in the filter condition.  This activates the check boxes under Connection and under Connected to.

 Clear this check box if you do not want to include any of the connection criteria in the filter condition.  Clearing this check box disables the Connection and the Connected to check boxes..

Connection — Allows you to define a filter according to the cable connection:

  • No connections on either end — Includes the cables that are not connected to anything on both ends.

  • At least one wire connected on one end only — Includes the cables that contain at least one wire that is only connected on one of its ends.

  • At least one wire connected to both ends — Includes the cables that contain at least one wire that is connected on its both ends.

Connected to — Allows you to define a filter according to the type of panel that is connected to the cable.  This selection sets connection criteria for cables that have at least one wire connected to one or both ends.

  • Junction boxes — Includes all the cables that are connected to junction boxes.

  • Marshaling racks — Includes all the cables that are connected to marshaling racks.

  • Cabinets — Includes all the cables that are connected to cabinets.

  • Device panels — Includes all the cables that are connected to device panels.

  • DCS panels — Includes all the cables that are connected to DCS panels.

  • PLC panels — Includes all the cables that are connected to PLC panels.

Cable associations

Allows you to filter the cables according to their associations.

Fieldbus segment — Allows you to filter for cables associated with a specific Foundation Fieldbus or Profibus segment.

Display telecom cables only — Allows you to filter for cables connected to telecom items.