Import System Interfaces - Intergraph Smart Instrumentation - 13.1 - Administration & Configuration - Hexagon PPM

Intergraph Smart Instrumentation Administration

Language
English (United States)
Product
Intergraph Smart Instrumentation
Search by Category
Administration & Configuration
Smart Instrumentation Version
13.1

You can import link groups from an external source file to the Smart Instrumentation database.  After you import these linked groups you can use them in the Import utility to import data from external sources.  You import the required external links first by connecting to a source file and then by importing the required link groups to your database.  After that, you can prepare and run the links in the Import Utility.

System interfaces are available for the following link groups:

  • PDS/Smart P&ID

  • Fisher

  • Performance Spec #1

  • Performance Spec #71

  • Masoneilan Spec #1

  • Masoneilan Spec #75

  1. Start the Administration module and log on as Domain Administrator.

  2. With the Domain Administration window open, click Add-Ins > Import System Interfaces.

  3. Under Source, locate the source file in one of the following ways:

    • In the File name and path box, type the path and filename of the source file In_ctlog.DDTI.

    • Click Browse to navigate to In_ctlog.DDTI.

  4. Click Open to open the source file.

     If you get a message stating that the connection has failed, make sure you typed in the correct path and filename of the source file (see step 3 of this procedure).

  5. Under Import, locate the source path of all the links in the imported group in one of the following ways:

    • In the Link group source file path field, type the source path.

    • Click Browse to navigate to the required source path.

  6. Under the Select link group section, select one or more of the link groups to import.

  7. Clear the Import only source codes check box if it was selected.

  8. If you are importing the PDS/Smart P&ID link, select or clear the Import typical instruments check box as required.

  9. Click Import to add the selected link group to the database.