Upgrade Smart P&ID - Intergraph Smart Engineering Manager - Installation & Upgrade - Intergraph

Intergraph Smart Engineering Manager Upgrade Utility Help

Intergraph Smart Engineering Manager
Installation & Upgrade
2018 (8.0)
7.1 (2014 R1)
9 (2018)

Use this procedure to upgrade Smart P&ID when status Upgrade available is displayed for this application.

  1. In the Active Plants node, right-click the plant and on the shortcut menu, click Upgrade P&ID.

    The utility moves the plant from the Active Plants node to the Upgrades in progress node and displays the list of upgrade tasks required to upgrade the P&ID application.

  2. In the Upgrades in progress node, right-click the plant and on the shortcut menu, click Finish All Tasks to complete the application upgrade.

    The following message appears:

  3. Click Yes to proceed with the next stage of the upgrade procedure.

    As each task is completed, its status changes from No to Yes and a progress bar at the bottom of the dialog box indicates the upgrade activity for the current task:

    After the application is upgraded, the utility moves the plant back under the Active plants node and updates the application status in the Upgrade Tasks pane to Up-to-date.

All drawings in the upgraded plant will be out-of-date because of select lists and formats. These drawings must be updated using the Update Drawings command in Drawing Manager.

See Also

Finish Next Task Command (File Menu)
Run to Selected Task Command (File Menu)