You can filter a 3D model or 2D drawing with Materials filters. When you filter a 3D model or 2D drawing with Materials filters, you can view Materials information related to 3D model or 2D drawing components and spools.
The following Materials filters are available for filtering:
Filter
|
Purpose
|
ETA greater than Required on Site
|
Indicates if materials are estimated to arrive at the site after the Required on Site (Req on Site) date.
|
ETA greater than IWP Planned Start
|
Indicates if materials are estimated to arrive after the Planned Start Date of the IWP package containing the materials.
|
Reserved
|
Displays model components that have been reserved in your external materials system.
|
Materials on Site
|
Displays components that have materials on site.
|
Materials with a Purchase Order
|
Displays components that have materials that are not on site but have a purchase order.
|
Insufficient quantity
|
Displays components that have an on-hand quantity of zero and a quantity less than
the BOM quantity.
|
Tell me more about how these Materials filters work
The table below describes in more technical detail how the filters get their data
from the Materials system.
Filter
|
Details (properties are from the Material system)
|
ETA greater than Required on Site
|
Compares the ETADate with the RequiredOnSiteDate for all tagged forecast materials
on components that belong to the current model. Returns any materials with ETA dates
past the ROS date.
|
ETA greater than IWP Planned Start
|
Compares the ETADate with the RequiredOnSiteDate for all tagged reserved materials
on planned components that belong to the current model. Returns any materials with ETA dates
past the ROS date.
|
Reserved
|
Returns all packaged components in the model that have a ReservedQuantity value greater
than one.
|
Materials on Site
|
Returns all model components that have been assigned to a Warehouse and OnHandQuantity
values greater than 0.
|
Materials with a Purchase Order
|
Returns all model components that have materials with an IIS value of "PO".
|
Insufficient quantity
|
Returns all model components that have an LPQuantity value greater than the value
of OnHandQuantity.
|