Add and configure a text box to the work package toolbar item - Intergraph Smart Construction - Hotfix 14 - Help - Hexagon

Intergraph Smart Construction Help

Language
English
Product
Intergraph Smart Construction
Search by Category
Help
Smart Construction Version
8
SmartPlant Foundation / SDx Version
10

You can use the Smart Construction - Display Editor window to create and configure a text box for the Smart Construction work package window.

  1. Open the Smart Construction - Display Editor on the toolbar item you want to configure. For more information, see Open the SmartPlant Construction Display Editor.

  2. On the Smart Construction - Display Editor window, select the Show Grid option to help arrange and align controls.

  3. Click Add on the Smart Construction - Display Editor window.

  4. Select Textbox on the Select Type dialog box.

  5. On the SPC Textbox Attribute dialog box, type a label name in the Label box. This is required.

  6. Type a pixel value in the Label Offset box to define where the label displays to the left of where the text box is positioned.

  7. Type a pixel value in the Width box to define the width of the text box.

    If you type zero as your value, the text box stretches to the screen width.

  8. Type a pixel value in the Height box to define the height of the text box. The default value is 23 pixels.

  9. Select an interface definition value in the Interface box to define where to save and retrieve the data of this control. This is required.

  10. Select a property definition value in the Property box. The property value is associated with the interface definition defined for the control, and it helps define where to save and retrieve the data of this control. This is required.

  11. In the Tab Order box, type a value to define the display sequence for this control on the work package window.

  12. Select Always or Read Only for the Edit Mode value.

  13. Select whether or not the text box value is required for the work package from the Required box.

  14. Click OK on the SPC Textbox Attribute dialog box to save changes to the new text box.