Displays properties for pipe takedown parts. A takedown part is a flange set placed along a pipe run used to make assembly and disassembly of the pipe run easier.
The order in which the properties display in your view depends on your configuration.
Is Weld
In Catalog, select Yes if the split or takedown joint is welded. Select No if it is not. Alternatively, in the Piping reference data type 1 (true) if the split or takedown joint is welded. Type 0 (false) if it is not.
Nominal Diameter
Specifies the nominal piping diameter for the object. If displays in the box, the nominal diameter is derived from a rule and not editable.
If the icon does not display, the value is user defined.
Pair Required
Specifies if a pair of parts is required. For example, flanges are used in pairs so you would set this column to Yes in Catalog or 1 (true) in the Piping reference data. Unions are not used in pairs so you would set this column to No in Catalog or 0 (false) in the Piping reference data.
Takedown Short Code
Specifies the short code to use if the user selects the Takedown option when using the Insert Split command.
Unit Type
Specifies the units for the NPD value. Select mm or in from the list.
Weld Short Code
Specifies the short code to use if the user selects the Weld option when using the Insert Split command.